2900316 Phoenix Contact Control Relays

Product Details

• Note
  Separating plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or FBST 500....
• Degree of protection
  RT III (Relay)
• Protective circuit
  Reverse polarity protection Polarity protection diode
• Minimum switching voltage
  5 V (at 100 mA)
• Limiting continuous current
  6 A
• Type of note
  Notes on operation
• Ambient temperature (operation)
  -40 °C ... 60 °C
• Typical input current at UN
  15.3 mA
• Operating voltage display
  Yellow LED
• Contact material
  AgSnO
• Maximum inrush current
  10 A (4 s)
• Interrupting rating (ohmic load) max.
  140 W (at 24 V DC)
• Operating mode
  100% operating factor
• Connection name
  Contact side
• Height
  80 mm
• Depth
  94 mm
• Typical release time
  8 ms
• Power dissipation for nominal condition
  0.18 W
• Contact type
  1 changeover contact
• Min. switching current
  10 mA (at 12 V)
Mechanical service life
2x 107 cycles
Assembly instructions
In rows with zero spacing
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Conductor cross section AWG
26 ... 14
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 10.0.1
27371601
ECLASS 6.0
27371600
ECLASS 5.1
27371600
ETIM 7.0
EC001437
UNSPSC 7.0901
39121515
UNSPSC 20.0
39122334
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Width
6.2 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Nominal input voltage UN
12 V DC
Typical response time
5 ms
Type of switch contact
Single contact
Maximum switching voltage
250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Switching capacity
2 A (at 24 V, DC13)
Flammability rating according to UL 94
V0 (Housing)
Mounting position
any
Connection in acc. with standard
CUL
Overvoltage category
III
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
27371000
ECLASS 9.0
27371601
ETIM 6.0
EC001437
UNSPSC 12.01
39121515
UNSPSC 18.0
39122334
Test voltage
4 kV AC (50 Hz, 1 min., winding/contact)
Connection method
Push-in connection
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Pollution degree
3
REACh SVHC
Lead 7439-92-1
ECLASS 5.0
27371600
ECLASS 7.0
27371601
ETIM 2.0
EC001437
ETIM 4.0
EC001437
UNSPSC 13.2
39122334
UNSPSC 19.0
39122334
Stripping length
8 mm
Designation
Corrosive gas test
Standards/regulations
IEC 60664
ECLASS 11.0
27371601
ECLASS 4.0
27371000
ETIM 3.0
EC001437
UNSPSC 6.01
30211916
UNSPSC 11
39121515
UNSPSC 21.0
39122334