2900304 Phoenix Contact Control Relays

Product Details

• Width
  6.2 mm
• Ambient temperature (operation)
  -40 °C ... 55 °C
• Typical response time
  6 ms
• Power dissipation for nominal condition
  0.42 W
• Contact material
  AgSnO
• Type of switch contact
  Single contact
• Limiting continuous current
  6 A
• Switching capacity
  2 A (at 24 V, DC13)
• Test voltage
  4 kV AC (50 Hz, 1 min., winding/contact)
• Mechanical service life
  2x 107 cycles
• Stripping length
  8 mm
• Conductor cross section AWG
  26 ... 14
• Identification
  ISA-S71.04. G3 Harsh Group
• REACh SVHC
  Lead 7439-92-1
• ECLASS 5.0
  27371600
• ECLASS 7.0
  27371601
• ETIM 4.0
  EC001437
• ETIM 6.0
  EC001437
• UNSPSC 11
  39121515
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
Height
80 mm
Degree of protection
RT III (Relay)
UNSPSC 21.0
39122334
Note
Separating plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or FBST 500....
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Typical input current at UN
3.5 mA (at UN = 120 V AC)
Contact type
1 changeover contact
Maximum switching voltage
250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Maximum inrush current
10 A (4 s)
Interrupting rating (ohmic load) max.
140 W (at 24 V DC)
Operating mode
100% operating factor
Connection name
Contact side
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Overvoltage category
III
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 6.0
27371600
ECLASS 9.0
27371601
UNSPSC 12.01
39121515
UNSPSC 19.0
39122334
Depth
94 mm
Nominal input voltage UN
120 V AC
Typical release time
15 ms
Protective circuit
Bridge rectifier Bridge rectifier
Operating voltage display
Yellow LED
Minimum switching voltage
5 V (at 100 mA)
Min. switching current
10 mA (at 12 V)
Flammability rating according to UL 94
V0 (Housing)
Mounting position
any
Connection method
Push-in connection
Connection in acc. with standard
CUL
Standards/regulations
IEC 60664
ECLASS 10.0.1
27371601
ECLASS 4.0
27371000
ECLASS 5.1
27371600
ETIM 3.0
EC001437
UNSPSC 6.01
30211916
UNSPSC 18.0
39122334
UNSPSC 20.0
39122334
Type of note
Notes on operation
Assembly instructions
In rows with zero spacing
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Designation
Corrosive gas test
Pollution degree
3
ECLASS 11.0
27371601
ECLASS 4.1
27371000
ETIM 2.0
EC001437
ETIM 7.0
EC001437
UNSPSC 7.0901
39121515
UNSPSC 13.2
39122334