2900301 Phoenix Contact Control Relays

Product Details

• Width
  6.2 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Typical response time
  5 ms
• Contact type
  1 changeover contact
• Depth
  94 mm
• Degree of protection
  RT III (Relay)
• Typical release time
  8 ms
• Operating voltage display
  yes
• Minimum switching voltage
  5 V (at 100 mA)
• Limiting continuous current
  6 A
• Interrupting rating (ohmic load) max.
  140 W (at 24 V DC)
• Flammability rating according to UL 94
  V0 (Housing)
• Mounting position
  any
• Stripping length
  8 mm
• Conductor cross section flexible
  0.14 mm² ... 2.5 mm²
• Standards/regulations
  IEC 60664
• Pollution degree
  3
• Overvoltage category
  III
• REACh SVHC
  Lead 7439-92-1
• ECLASS 4.0
  27371000
ECLASS 5.0
27371600
ECLASS 4.1
27371000
ECLASS 9.0
27371601
ETIM 3.0
EC001437
ETIM 4.0
EC001437
ETIM 6.0
EC001437
UNSPSC 11
39121515
UNSPSC 12.01
39121515
UNSPSC 18.0
39122334
UNSPSC 21.0
39122334
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (operation)
-40 °C ... 60 °C
Nominal input voltage UN
48 V DC
Protective circuit
Reverse polarity protection Polarity protection diode
Height
80 mm
Typical input current at UN
9.2 mA
Power dissipation for nominal condition
0.44 W
Type of switch contact
Single contact
Maximum switching voltage
250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Maximum inrush current
10 A (4 s)
Test voltage
4 kV AC (50 Hz, 1 min., winding/contact)
Operating mode
100% operating factor
Assembly instructions
In rows with zero spacing
Connection method
Push-in connection
Contact material
AgSnO
Min. switching current
10 mA (at 12 V)
Switching capacity
2 A (at 24 V, DC13)
Mechanical service life
2x 107 cycles
Connection name
Contact side
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Conductor cross section AWG
26 ... 14
Connection in acc. with standard
CUL
Designation
Corrosive gas test
Identification
ISA-S71.04. G3 Harsh Group
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 10.0.1
27371601
ECLASS 11.0
27371601
ECLASS 5.1
27371600
ECLASS 6.0
27371600
ECLASS 7.0
27371601
ETIM 2.0
EC001437
ETIM 7.0
EC001437
UNSPSC 6.01
30211916
UNSPSC 7.0901
39121515
UNSPSC 19.0
39122334
UNSPSC 13.2
39122334
UNSPSC 20.0
39122334