2900300 Phoenix Contact Control Relays

Product Details

• Type of note
  Notes on operation
• Height
  80 mm
• Width
  6.2 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Nominal input voltage UN
  24 V AC/DC
• Protective circuit
  Bridge rectifier Bridge rectifier
• Operating voltage display
  Yellow LED
• Power dissipation for nominal condition
  0.26 W
• Maximum switching voltage
  250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
• Minimum switching voltage
  5 V (at 100 mA)
• Min. switching current
  10 mA (at 12 V)
• Switching capacity
  2 A (at 24 V, DC13)
• Test voltage
  4 kV AC (50 Hz, 1 min., winding/contact)
• Operating mode
  100% operating factor
• Assembly instructions
  In rows with zero spacing
• Connection name
  Contact side
• Connection method
  Push-in connection
• Conductor cross section AWG
  26 ... 14
• Connection in acc. with standard
  CUL
• Note
  Separating plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or FBST 500....
Depth
94 mm
Ambient temperature (operation)
-40 °C ... 60 °C
Degree of protection
RT III (Relay)
Typical input current at UN
11 mA (at UN = 24 V AC)
Typical response time
6 ms
Typical release time
15 ms
Contact type
1 changeover contact
Type of switch contact
Single contact
Contact material
AgSnO
Maximum inrush current
10 A (4 s)
Limiting continuous current
6 A
Interrupting rating (ohmic load) max.
140 W (at 24 V DC)
Flammability rating according to UL 94
V0 (Housing)
Mechanical service life
2x 107 cycles
Mounting position
any
Stripping length
8 mm
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Standards/regulations
IEC 60664
Pollution degree
3
Identification
ISA-S71.04. G3 Harsh Group
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
27371000
ECLASS 4.1
27371000
ECLASS 5.1
27371600
ECLASS 9.0
27371601
ETIM 2.0
EC001437
ETIM 3.0
EC001437
UNSPSC 6.01
30211916
UNSPSC 7.0901
39121515
UNSPSC 12.01
39121515
UNSPSC 11
39121515
UNSPSC 13.2
39122334
UNSPSC 18.0
39122334
UNSPSC 19.0
39122334
UNSPSC 21.0
39122334
UNSPSC 20.0
39122334
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Designation
Corrosive gas test
Overvoltage category
III
REACh SVHC
Lead 7439-92-1
ECLASS 11.0
27371601
ECLASS 10.0.1
27371601
ECLASS 5.0
27371600
ECLASS 6.0
27371600
ECLASS 7.0
27371601
ETIM 4.0
EC001437
ETIM 6.0
EC001437
ETIM 7.0
EC001437