2900295 Phoenix Contact Control Relays

Product Details

• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Width
  14 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Typical response time
  8 ms
• Operating voltage display
  Yellow LED
• Power dissipation for nominal condition
  0.6 W
• Minimum switching voltage
  12 V (at 10 mA)
• Switching capacity
  2 A (at 24 V, DC13)
• Flammability rating according to UL 94
  V0 (Housing)
• Assembly instructions
  In rows with zero spacing
• Conductor cross section flexible
  0.14 mm² ... 2.5 mm²
• Conductor cross section solid
  0.14 mm² ... 2.5 mm²
• Insulation
  Safe isolation, reinforced insulation
• Pollution degree
  2
• Identification
  ISA-S71.04. G3 Harsh Group
• ECLASS 4.0
  27371000
• ECLASS 5.0
  27371600
• ECLASS 7.0
  27371601
• ETIM 4.0
  EC001437
• UNSPSC 6.01
  30211916
UNSPSC 11
39121515
UNSPSC 19.0
39122334
Height
80 mm
Degree of protection
RT II (Relay)
Protective circuit
Reverse polarity protection Polarity protection diode
Maximum switching voltage
250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Min. switching current
10 mA (at 12 V)
Interrupting rating (ohmic load) max.
240 W (at 24 V DC)
Mounting position
any
Stripping length
8 mm
Designation
Corrosive gas test
Rated surge voltage
6 kV
REACh SVHC
Lead 7439-92-1
ECLASS 11.0
27371601
ECLASS 4.1
27371000
ECLASS 6.0
27371600
ETIM 2.0
EC001437
ECLASS 9.0
27371601
ETIM 6.0
EC001437
UNSPSC 12.01
39121515
UNSPSC 20.0
39122334
Ambient temperature (operation)
-40 °C ... 60 °C
Nominal input voltage UN
60 V DC
Contact type
1 changeover contact
Maximum inrush current
30 A (300 ms)
Interrupting rating (ohmic load) max. bridged
144 W (for 24 V DC. Value applies to connections 12. If connections 12 are bridged, the normal value applies.)
Operating mode
100% operating factor
Connection method
Push-in connection
UNSPSC 21.0
39122334
Depth
94 mm
Typical input current at UN
10 mA
Typical release time
10 ms
Contact material
AgNi
Type of switch contact
Single contact
Limiting continuous current
10 A
Mechanical service life
3x 107 cycles
Connection name
Contact side
Conductor cross section AWG
26 ... 14
Connection in acc. with standard
CUL
Standards/regulations
IEC 60664
Overvoltage category
III
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 10.0.1
27371601
ECLASS 5.1
27371600
ETIM 3.0
EC001437
ETIM 7.0
EC001437
UNSPSC 7.0901
39121515
UNSPSC 18.0
39122334
UNSPSC 13.2
39122334