2900294 Phoenix Contact Control Relays

Product Details

• Ambient temperature (operation)
  -40 °C ... 60 °C
• Degree of protection
  RT II (Relay)
• Protective circuit
  Reverse polarity protection Polarity protection diode
• Type of switch contact
  Single contact
• Power dissipation for nominal condition
  0.96 W
• Maximum switching voltage
  250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
• UNSPSC 11
  39121515
• Width
  14 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Typical release time
  10 ms
• Contact type
  1 changeover contact
• Maximum inrush current
  30 A (300 ms)
• Limiting continuous current
  10 A
• Interrupting rating (ohmic load) max.
  240 W (at 24 V DC)
• Flammability rating according to UL 94
  V0 (Housing)
• Connection name
  Contact side
• Conductor cross section AWG
  26 ... 14
• Standards/regulations
  IEC 60664
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 10.0.1
  27371601
ECLASS 4.0
27371000
ECLASS 5.1
27371600
ECLASS 4.1
27371000
ETIM 2.0
EC001437
UNSPSC 6.01
30211916
ETIM 7.0
EC001437
UNSPSC 18.0
39122334
UNSPSC 21.0
39122334
Depth
94 mm
Nominal input voltage UN
48 V DC
Typical input current at UN
20 mA
Operating voltage display
Yellow LED
Min. switching current
10 mA (at 12 V)
Switching capacity
2 A (at 24 V, DC13)
Mounting position
any
Operating mode
100% operating factor
Stripping length
8 mm
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Connection in acc. with standard
CUL
Rated surge voltage
6 kV
Overvoltage category
III
ECLASS 11.0
27371601
ECLASS 6.0
27371600
ECLASS 9.0
27371601
ETIM 4.0
EC001437
ETIM 6.0
EC001437
UNSPSC 13.2
39122334
UNSPSC 20.0
39122334
UNSPSC 7.0901
39121515
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Height
80 mm
Typical response time
8 ms
Contact material
AgNi
Minimum switching voltage
12 V DC (at 10 mA)
Interrupting rating (ohmic load) max. bridged
144 W (for 24 V DC. Value applies to connections 12. If connections 12 are bridged, the normal value applies.)
Mechanical service life
3x 107 cycles
Assembly instructions
In rows with zero spacing
Connection method
Push-in connection
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Designation
Corrosive gas test
Insulation
Safe isolation, reinforced insulation
Pollution degree
2
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 7.0
27371601
ECLASS 5.0
27371600
ETIM 3.0
EC001437
UNSPSC 19.0
39122334
UNSPSC 12.01
39121515