2900290 Phoenix Contact Control Relays

Product Details

• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Typical input current at UN
  33 mA
• Type of switch contact
  Single contact
• Maximum inrush current
  30 A (300 ms)
• Mechanical service life
  3x 107 cycles
• Stripping length
  8 mm
• Designation
  Corrosive gas test
• Pollution degree
  2
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 6.0
  27371600
• ETIM 3.0
  EC001437
• UNSPSC 11
  39121515
• UNSPSC 18.0
  39122334
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Degree of protection
  RT II (Relay)
• Typical release time
  10 ms
• Operating voltage display
  Yellow LED
• Contact material
  AgNi
• Min. switching current
  100 mA
• Flammability rating according to UL 94
  V0 (Housing)
Connection method
Push-in connection
Connection in acc. with standard
CUL
Rated surge voltage
6 kV
ECLASS 10.0.1
27371601
ECLASS 5.0
27371600
ETIM 7.0
EC001437
UNSPSC 7.0901
39121515
UNSPSC 21.0
39122334
Width
14 mm
Ambient temperature (operation)
-40 °C ... 60 °C
Power dissipation for nominal condition
0.4 W
Maximum switching voltage
250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Interrupting rating (ohmic load) max. bridged
144 W (for 24 V DC. Value applies to connections 12. If connections 12 are bridged, the normal value applies.)
Operating mode
100% operating factor
Mounting position
any
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Overvoltage category
III
REACh SVHC
Lead 7439-92-1
ECLASS 5.1
27371600
ETIM 2.0
EC001437
ETIM 4.0
EC001437
UNSPSC 19.0
39122334
UNSPSC 20.0
39122334
Depth
94 mm
Typical response time
8 ms
Contact type
1 changeover contact
Minimum switching voltage
12 V AC/DC
Interrupting rating (ohmic load) max.
240 W (at 24 V DC)
Assembly instructions
In rows with zero spacing
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Insulation
Safe isolation, reinforced insulation
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 4.0
27371000
ECLASS 9.0
27371601
ECLASS 7.0
27371601
UNSPSC 6.01
30211916
UNSPSC 12.01
39121515
Height
80 mm
Nominal input voltage UN
12 V DC
Protective circuit
Reverse polarity protection Polarity protection diode
Limiting continuous current
10 A
Switching capacity
2 A (at 24 V, DC13)
Connection name
Contact side
Conductor cross section AWG
26 ... 14
Standards/regulations
IEC 60664
ECLASS 11.0
27371601
ECLASS 4.1
27371000
ETIM 6.0
EC001437
UNSPSC 13.2
39122334