2900177 Phoenix Contact Control Relays

Product Details

• Depth
  113 mm
• Overload capacity
  12 A permanent
• Max. setting range
  10 % ... 120 % (of PN)
• Total cold resistance
  < 1.5 kΩ
• Setting accuracy
  ≤ 5 % (of scale end value)
• Nominal input voltage UN
  480 V (3 N ~ 480/277 V)
• Maximum temperature coefficient
  ≤ 0.02 %/K
• Setting range for response delay
  0.1 s ... 50 s
• Release value
  ≤ 1.8 kΩ (Relay picks up)
• Height
  90 mm
• Output fuse
  5 A (fast-blow)
• Connection method
  Screw connection
• Housing insulation material
  Polyamide PA, self-extinguishing
• Conductor cross section flexible
  0.25 mm² ... 2.5 mm²
• Insulation
  Basic insulation
• China RoHS
  Environmentally friendly use period: unlimited = EFUP-e
• ECLASS 5.1
  27371800
• ETIM 4.0
  EC001440
• UNSPSC 6.01
  30211916
• Width
  45 mm
Input voltage range
0 V AC ... 480 V AC (1(N) ~, single-phase load)
Min. setting range
5 % ... 110 % (of PN)
Setting range for starting delay
1 s ... 100 s
Basic accuracy
± 2 % (of scale end value)
Supply voltage range
110 V AC ... 500 V AC (see Power modules)
Assembly instructions
on standard DIN rail NS 35 in accordance with EN 60715
Color
green
Pollution degree
2
ECLASS 11.0
27371806
ETIM 3.0
EC001440
UNSPSC 18.0
39121106
UNSPSC 13.2
39121106
Ambient temperature (operation)
-25 °C ... 55 °C
Permissible humidity (operation)
15 % ... 85 %
Input current range
0.15 A ... 6 A (Range: 0.75 kW and 1.5 kW)
Repeat accuracy
± 2 %
Recovery time
500 ms
Interrupting rating (ohmic load) max.
750 VA (3 A/250 V AC, module aligned, ≤ 5 mm spacing)
Operating mode
100% operating factor
Conductor cross section AWG
20 ... 14
Rated insulation voltage
300 V
Ambient temperature (storage/transport)
-25 °C ... 70 °C
Degree of protection
IP40 (Housing)
Function
Underload, overload, window, winding temperature monitoring
Contact type
2 floating changeover contacts
Maximum switching voltage
250 V AC (in acc. with IEC 60664-1)
Mechanical service life
approx. 2x 107 cycles
Stripping length
8 mm
Standards/regulations
EN 50178
Overvoltage category
III
ECLASS 4.1
27250300
ETIM 6.0
EC001443
Response value
≥ 3.6 kΩ (Relay drops out)
Mounting position
any
Tightening torque
1 Nm
UNSPSC 11
39121535
ECLASS 7.0
27371806
ECLASS 5.0
27371800
ECLASS 9.0
27371806
UNSPSC 12.01
39121535
Conductor cross section solid
0.5 mm² ... 2.5 mm²
UNSPSC 7.0901
39121535
ECLASS 10.0.1
27371806
ECLASS 6.0
27371800
UNSPSC 19.0
39121106
ECLASS 4.0
27250300
ETIM 7.0
EC001443
UNSPSC 21.0
39121106
UNSPSC 20.0
39121106