2891315 Phoenix Contact Data & Networking Devices

Product Details

• Height
  110 mm
• Permissible humidity (operation)
  5 % ... 95 % (non-condensing)
• Mounting type
  DIN rail mounting
• Nominal supply voltage
  24 V DC
• Connection method
  SC duplex
• Conductor cross section solid max.
  2.50 mm²
• Depth
  70 mm
• Altitude
  4850 m
• Test voltage data interface/power supply
  1500 V AC (500 V AC, 1 minute)
• Mounting position
  On horizontal DIN rail NS 35 in acc. with EN 60715
• Supply voltage range
  12 V DC ... 48 V DC
• Conductor cross section flexible min.
  0.20 mm²
• Conductor cross section AWG max.
  12
• Transmission medium
  Multi-mode fiberglass
• Wavelength
  1310 nm
• Output description
  Alarm output
• Contact type
  N/C contact
• Type of test
  Shock in acc. with EN 60068-2-27/IEC 60068-2-27
• ECLASS 10.0.1
  19170132
• ECLASS 5.0
  27230200
ETIM 4.0
EC001099
UNSPSC 18.0
43223323
UNSPSC 19.0
43223323
Ambient temperature (operation)
-40 °C ... 75 °C
Latency
865 ns (Pass-through mode)
Degree of protection
IP20
Conformance
CE-compliant
UL, USA/Canada
Class I, Div. 2, Groups A, B, C, D
Conductor cross section flexible max.
2.50 mm²
Max. AWG conductor cross section, flexible
12
No. of ports
1
Auto-negotiation modes
Auto
Transmission length incl. 3 dB system reserve
8 km (fiberglass with F-G 62.5/125 0.7 dB/km F1000)
Maximum switching voltage
24 V DC
Standards/regulations
EN 61000-4-5
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
27230200
ECLASS 5.1
27230200
UNSPSC 13.2
43222604
Width
28 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Housing material
Aluminum
MTTF
77.82 Years (MIL-HDBK-217F standard, temperature 25°C, operating cycle 100%)
Conductor cross section solid min.
0.20 mm²
Min. AWG conductor cross section, flexible
24
Interface 1
Ethernet interface, 10/100Base-T(X) in accordance with IEEE 802.3
Link through
Link fault pass through
MDI-/MDI-X switchover
Auto-MDI(X)
Number of outputs
1
Test result
30g, 11 ms half-sine shock pulse
Shock
300 m/s², 11 ms (IEC 60068-2)
ECLASS 11.0
19170411
ECLASS 4.1
27230200
ECLASS 6.0
19179200
ETIM 6.0
EC001467
UNSPSC 20.0
43223323
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Permissible humidity (storage/transport)
5 % ... 95 % (non-condensing)
Electrical isolation
VCC // FE // Ethernet
Net weight
298.7 g
Typical current consumption
110 mA (24 V DC)
UNSPSC 21.0
43223323
ECLASS 7.0
19179290
Conductor cross section AWG min.
24
Transmission length
100 m (twisted pair, shielded)
Signal LEDs
LNK/ACT, 100
Serial transmission speed
10/100 Mbps
Output name
Relay output
Comments
Criterion A
China RoHS
Environmentally Friendly Use Period = 10;
ECLASS 9.0
19170114
ETIM 7.0
EC001467
Max. switching current
100 mA