2866514 Phoenix Contact Redundancy Modules

Product Details

• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Protection class
  III
• Conductor cross section solid min.
  0.2 mm²
• EMC requirements for noise immunity
  EN 61000-6-1
• Standard - Safe isolation
  DIN VDE 0100-410
• Electromagnetic HF field
  EN 61000-4-3
• REACh SVHC
  Lead 7439-92-1
• ECLASS 6.0
  27371000
• ECLASS 9.0
  27371010
• UNSPSC 7.0901
  39121004
• UNSPSC 18.0
  32151504
• Height
  130 mm
• Degree of protection
  IP20
• Degree of pollution
  2
• Nominal output current (IN)
  20 A (Increasing power)
• Net weight
  0.37 kg
• Assembly instructions
  alignable: horizontally 0 mm, vertically 50 mm
• Conductor cross section AWG max.
  14
• Conductor cross section AWG min.
  24
• Standard – Protection against shock currents, basic requirements for protective separation in electrical equipment
  EN 50178
Electrostatic discharge
EN 61000-4-2
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 10.0.1
27371010
ETIM 3.0
EC001039
ECLASS 7.0
27371010
UNSPSC 11
39121004
Depth
115 mm
Climatic class
3K3 (in acc. with EN 60721)
Maximum input current
2x 15 A (-25°C ... 40°C)
Input voltage range
10 V DC ... 30 V DC
Power loss nominal load max.
7 W (IOUT = 10 A)
Connection method
Screw connection
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible max.
2.5 mm²
Standard - Electrical safety
EN 60950-1/VDE 0805 (SELV)
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Surge voltage load (surge)
EN 61000-4-5
ECLASS 11.0
27371010
ECLASS 4.0
27250300
ETIM 7.0
EC000683
UNSPSC 12.01
39121004
UNSPSC 21.0
32151504
Installation distance right/left
0 mm / 0 mm
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Nominal input current
2x 10 A (-25 °C ... 55 °C)
Setting range of the output voltage (USet)
12 V DC ... 24 V DC
Derating
55 °C ... 70 °C (2.5%/K)
Housing material
Steel sheet, zinc-plated
Stripping length
14 mm
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
Standard – Safety extra-low voltage
IEC 60950-1 (SELV) and EN 60204-1 (PELV)
Fast transients (burst)
EN 61000-4-4
Conducted interference
EN 61000-4-6
ECLASS 5.0
27371000
ETIM 6.0
EC000683
UNSPSC 6.01
30211502
UNSPSC 19.0
32151504
Width
32 mm
Installation distance top/bottom
50 mm / 50 mm
Ambient temperature (operation)
-25 °C ... 70 °C (> 55° C derating : 2.5%/K)
Nominal input voltage range
12 V DC ... 24 V DC
Connection in series
No
Efficiency
> 97 %
Mounting position
horizontal DIN rail NS 35, EN 60715
Conductor cross section flexible min.
0.2 mm²
Screw thread
M2,5
EMC requirements for noise emission
EN 61000-6-3
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
UL approvals
UL/C-UL listed UL 508
ECLASS 4.1
27250300
ECLASS 5.1
27371000
ETIM 4.0
EC002542
UNSPSC 13.2
39121004
UNSPSC 20.0
32151504