2866271 Phoenix Contact DC/DC Converters

Product Details

• Height
  99 mm
• Installation distance right/left
  0 mm / 0 mm (≤ 70 °C)
• Ambient temperature (operation)
  -25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
• Depth
  107 mm
• Degree of protection
  IP20
• Input voltage range
  36 V DC ... 75 V DC
• Current consumption
  0.6 A (48 V DC)
• Input fuse
  3.15 A (slow-blow, internal)
• Nominal output current (IN)
  1 A (-25 °C ... 60 °C)
• Residual ripple
  < 40 mVPP
• Net weight
  0.2 kg
• Housing material
  Polyamide (PA)
• Conductor cross section solid max.
  2.5 mm²
• Conductor cross section flexible max.
  2.5 mm²
• Output name
  DC OK active
• Status display
  "DC OK" LED green
• Tightening torque max
  0.6 Nm
• Standard - Electrical safety
  EN 60950-1/VDE 0805 (SELV)
• UL approvals
  UL/C-UL listed UL 508
• Surge voltage load (surge)
  EN 61000-4-5
Voltage dips
EN 61000-4-11
ECLASS 4.1
27210900
ECLASS 6.0
27210900
ETIM 2.0
EC001039
ETIM 7.0
EC002046
UNSPSC 13.2
39121041
UNSPSC 21.0
39121041
Width
22.5 mm
Installation distance top/bottom
50 mm / 50 mm (≤ 70 °C)
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Inrush current
< 15 A (typical)
Nominal output voltage
24 V DC ±1 %
Typical response time
< 0.5 s
Peak switching voltages nominal load
< 50 mVPP (20 MHz)
Power loss nominal load max.
< 5 W
Insulation voltage input/output
1.5 kV (type test)
Assembly instructions
alignable: horizontally 0 mm, vertically 50 mm
Conductor cross section flexible min.
0.2 mm²
Conductor cross section AWG max.
14
Output voltage
+ 24 V (Signal)
EMC requirements for noise immunity
EN 61000-6-1
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Fast transients (burst)
EN 61000-4-4
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 4.0
27210900
ECLASS 7.0
27210901
ECLASS 9.0
27210901
ETIM 4.0
EC000599
UNSPSC 12.01
39121004
UNSPSC 19.0
39121041
Frequency range DC
0 Hz
Mains buffering time
typ. 15 ms (48 V DC)
Derating
60 °C ... 70 °C (2.5%/K)
Connection in series
yes
Maximum power dissipation in no-load condition
< 1.2 W
Efficiency
> 85 % (at 60 V DC and nominal values)
Mounting position
horizontal DIN rail NS 35, EN 60715
Conductor cross section solid min.
0.2 mm²
Screw thread
M3
Maximum switching voltage
≤ 24 V DC
Tightening torque, min
0.5 Nm
EMC requirements for noise emission
EN 61000-6-3
Rail applications
EN 50121-4
Electromagnetic HF field
EN 61000-4-3
REACh SVHC
Lead 7439-92-1
ECLASS 10.0.1
27210901
ECLASS 5.1
27210900
ETIM 6.0
EC002046
UNSPSC 11
39121004
UNSPSC 18.0
39121041
Nominal input voltage range
48 V DC ... 60 V DC
Setting range of the output voltage (USet)
22.5 V DC ... 28.5 V DC (> 24 V DC, constant capacity restricted)
Connection in parallel
Yes, for assembling redundant systems and increasing efficiency
Output power
24 W
Operating voltage display
Green LED
Protection class
II
Connection method
Pluggable screw connection
Conductor cross section AWG min.
24
Stripping length
7 mm
Output description
UOUT > 21.5 V: High signal
Continuous load current
≤ 20 mA
Standard - Safe isolation
DIN VDE 0100-410
Electrostatic discharge
EN 61000-4-2
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Conducted interference
EN 61000-4-6
ECLASS 11.0
27210901
ECLASS 5.0
27210900
ETIM 3.0
EC001039
UNSPSC 6.01
30211502
UNSPSC 7.0901
39121004
UNSPSC 20.0
39121041