2865007 Phoenix Contact Electrical Measuring & Monitoring Instruments

Product Details

• Width
  6.2 mm
• Height
  93.1 mm
• Depth
  101.2 mm
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Maximum altitude
  ≤ 2000 m
• Ambient temperature (operation)
  -20 °C ... 65 °C
• Degree of protection
  IP20
• Permissible humidity (operation)
  5 % ... 95 % (non-condensing)
• Noise immunity
  EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
• Configurable/programmable
  Yes, unconfigured
• Number of inputs
  1
• max. input voltage
  50 V DC
• Voltage input signal
  0 V ... 24 V
• Input resistance of voltage input
  approx. 125 kΩ (0 ... 24 V)
• Voltage output signal
  0 V ... 10 V
• Number of outputs
  1
• Max. output current
  28 mA
• Max. output voltage
  ≤ 12.5 V
• Current output signal
  0 mA ... 20 mA
Load/output load voltage output
> 10 kΩ
Load/output load current output
< 500 Ω (at 20 mA)
Short-circuit current
≤ 22 mA
Nominal supply voltage
24 V DC
Ripple
< 20 mVPP (at 500 Ω)
Supply voltage range
19.2 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Max. current consumption
< 19 mA (at 24 V DC incl. load)
Power consumption
< 450 mW
Stripping length
12 mm
Connection method
Screw connection
Screw thread
M3
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Conductor cross section AWG
26 ... 12
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Maximum temperature coefficient
< 0.01 %/K
No. of channels
1
Temperature coefficient, typical
< 0.002 %/K
Maximum transmission error
< 0.1 % (of final value)
Limit frequency (3 dB)
approx. 100 Hz
Protective circuit
Transient protection
Step response (10-90%)
approx. 3.5 ms
Electrical isolation
Basic insulation according to EN 61010
Overvoltage category
II
Rated insulation voltage
50 V AC/DC
Degree of pollution
2
Test voltage, input/output/supply
1.5 kV (50 Hz, 1 min.)
Electromagnetic compatibility
Conformance with EMC directive
Noise emission
EN 61000-6-4
Housing material
PBT
Assembly instructions
To bridge the supply voltage, the DIN rail connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used. It can be snapped onto a 35 mm DIN rail according to EN 60715.
Color
green
Mounting position
any
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
Designation
Shipbuilding approval
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
Standards/regulations
EN 61000-4-6
Connection in acc. with standard
CUL
Certificate
DNV GL TAA000020N
REACh SVHC
Lead 7439-92-1
ECLASS 5.0
27210100
ECLASS 9.0
27210120
UNSPSC 7.0901
39121008
UNSPSC 19.0
39121008
Typical deviation from the measuring range final value
5 %
Temperature
B
ECLASS 10.0.1
27210120
ECLASS 4.1
27210100
ETIM 4.0
EC002653
UNSPSC 18.0
39121008
Identification
UL 508 Recognized
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
27210100
ECLASS 6.0
27210100
ETIM 6.0
EC002653
UNSPSC 6.01
30211506
UNSPSC 20.0
39121008
Humidity
B
Enclosure
Required protection according to the Rules shall be provided upon installation on board
ECLASS 5.1
27210100
UNSPSC 11
39121008
UNSPSC 13.2
39121008
Vibration
B
EMC
A
ECLASS 11.0
27210120
ECLASS 7.0
27210120
ETIM 7.0
EC002653
UNSPSC 12.01
39121008
UNSPSC 21.0
39121008