2864176 Phoenix Contact Electrical Measuring & Monitoring Instruments

Product Details

• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Configurable/programmable
  Yes, unconfigured
• Max. input current
  50 mA
• Max. output current
  approx. 22 mA
• Supply voltage range
  19.2 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
• Conductor cross section solid
  0.2 mm² ... 2.5 mm²
• No. of channels
  2
• Limit frequency (3 dB)
  approx. 35 Hz
• Housing material
  PBT
• Assembly instructions
  The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 2
• Enclosure
  Required protection according to the Rules shall be provided upon installation on board
• Width
  6.2 mm
• Maximum altitude
  ≤ 2000 m
• Voltage input signal
  0 V ... 10 V (please indicate if different setting when ordering)
• Number of outputs
  2
• Max. current consumption
  < 30 mA (at 24 V DC incl. load)
• Conductor cross section flexible
  0.2 mm² ... 2.5 mm²
• Overvoltage category
  II
• Rated insulation voltage
  50 V AC/DC
Noise emission
EN 61000-6-4
Designation
Shipbuilding approval
Identification
UL 508 Recognized
Temperature
B
ECLASS 11.0
27210120
ECLASS 4.0
27210100
ECLASS 9.0
27210120
UNSPSC 7.0901
39121008
UNSPSC 21.0
39121008
Depth
101.2 mm
Number of inputs
1
Current input signal
0 mA ... 20 mA
max. input voltage
30 V
Current output signal
2x 0 mA ... 20 mA
Nominal supply voltage
24 V DC
Screw thread
M3
Maximum transmission error
≤ 0.2 % (of final value)
Maximum temperature coefficient
< 0.01 %/K
Protective circuit
Transient protection
Electromagnetic compatibility
Conformance with EMC directive
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
Certificate
DNV GL TAA00002R0
Vibration
B
Humidity
B
China RoHS
Environmentally Friendly Use Period = 50 years
ETIM 7.0
EC002653
UNSPSC 13.2
39121008
UNSPSC 12.01
39121008
Height
93.1 mm
Degree of protection
IP20
Input resistance current input
approx. 50 Ω
Load/output load current output
≤ 250 Ω (at 20 mA)
Power consumption
< 600 mW
Conductor cross section AWG
26 ... 12
Temperature coefficient, typical
< 0.004 %/K
Degree of pollution
2
Mounting position
any
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
Standards/regulations
EN 61000-4-6
Connection in acc. with standard
CUL
ECLASS 4.1
27210100
ECLASS 10.0.1
27210120
ECLASS 6.0
27210100
UNSPSC 19.0
39121008
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (operation)
-20 °C ... 60 °C
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Input resistance of voltage input
approx. 100 kΩ
Ripple
< 20 mVPP (at 250 Ω)
Connection method
Screw connection
Stripping length
12 mm
Transmission error, typical
< 0.1 %
Electrical isolation
Basic insulation according to EN 61010
Test voltage, input/output/supply
1.5 kV (50 Hz, 1 min.)
Color
green
Typical deviation from the measuring range final value
5 %
EMC
A
ECLASS 5.0
27210100
ECLASS 7.0
27210120
UNSPSC 6.01
30211506
UNSPSC 11
39121008
UNSPSC 18.0
39121008
REACh SVHC
Lead 7439-92-1
ECLASS 5.1
27210100
ETIM 4.0
EC002653
ETIM 6.0
EC002653
UNSPSC 20.0
39121008