2811873 Phoenix Contact Electrical Measuring & Monitoring Instruments

Product Details

• Current output signal
  4 mA ... 20 mA (in the case of SIL; further free configuration without SIL)
• Width
  17.5 mm
• Maximum altitude
  ≤ 2000 m
• Sensor types (RTD) that can be used
  Pt, Ni, Cu sensors: 2, 3, 4-wire
• Output name
  Relay output
• Height
  112.5 mm
• Conductor cross section AWG
  24 ... 14
• Interference emission
  EN 61000-6-4
• Insulation
  Safe isolation in accordance with IEC/EN 61010-1
• Conformance
  CE-compliant
• DNV GL-Humidity
  B
• Certificate
  DNV GL TAA000020C
• Sensor types that can be used (TC)
  B, E, J, K, N, R, S, T, L, U, CA, DA, A1G, A2G, A3G, MG, LG
• Max. voltage output signal
  ± 11 V
• Behavior in the event of a sensor error
  according to NE 43 or freely configurable
• Maximum switching voltage
  30 V AC (30 V DC)
• Enclosure
  Required protection according to the Rules shall be provided upon installation on board
• Load/output load voltage output
  ≥ 10 kΩ
• Maximum inrush current
  0.5 A (30 V AC)
• Connection method
  Screw connection
Degree of pollution
2
Color
gray
Electrical isolation
4-way, between input/output/power supply/switching output
UL, USA/Canada
UL 508 Listed
DNV GL-Vibration
A
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Temperature measuring range
-250 °C ... 2500 °C (Range depending on the sensor type)
Configurable/programmable
Yes
Vibration
A
Ambient temperature (operation)
-20 °C ... 65 °C
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Electromagnetic compatibility
Conformance with EMC directive
Designation
Safety Integrity Level (SIL, IEC 61508)
IECEx
Ex nA nC ic IIC T4 Gc X
DNV GL-Enclosure
Required protection according to the Rules shall be provided upon installation on board
Humidity
B
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27200200
ECLASS 4.0
27200200
ECLASS 9.0
27210129
UNSPSC 7.0901
39121008
UNSPSC 19.0
41112105
Potentiometer resistance range
0 Ω ... 50 kΩ
Load/output load current output
≤ 600 Ω (at 20 mA)
Contact material
AgSnO2, hard gold-plated
Stripping length
7 mm
Screw thread
M3
Input signal range
-1000 mV ... 1000 mV
Max. current output signal
22 mA
Contact type
1 changeover contact
Power consumption
< 1.5 W
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Maximum temperature coefficient
0.01 %/K
Rated insulation voltage
300 Vrms
Noise emission
EN 61000-6-4
DNV GL-Temperature
B
Identification
2
EMC
A
ECLASS 10.0.1
27210129
ECLASS 6.0
27200200
ECLASS 4.1
27200200
ETIM 2.0
EC001446
UNSPSC 6.01
30211506
UNSPSC 18.0
41112105
Depth
114.5 mm
Permissible humidity (operation)
typ. 5 % ... 95 % (non-condensing)
Supply voltage range
24 V ... 230 V AC/DC (-20 %/+10 %, 50/60 Hz)
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Housing material
PA 6.6-FR
Overvoltage category
II
Test voltage
2.5 kV AC (50 Hz, 1 min.)
ATEX
 II 3 G Ex nA nC ic IIC T4 Gc X
DNV GL-EMC
A
Temperature
B
ETIM 4.0
EC001446
UNSPSC 11
39121008
UNSPSC 20.0
41112105
UNSPSC 21.0
41112105
ETIM 6.0
EC002919
ECLASS 5.0
27200200
ECLASS 7.0
27200206
ETIM 7.0
EC002919
UNSPSC 12.01
39121008
ETIM 3.0
EC001446
UNSPSC 13.2
41112105
REACh SVHC
Lead 7439-92-1
ECLASS 11.0
27210129