2800928 Phoenix Contact Electrical Circuit Protection & Load Centers

Product Details

• Width
  12.3 mm
• Ambient temperature (storage/transport)
  -40 °C ... 70 °C
• Number of positions
  1
• Operating voltage
  24 V DC
• Tripping method
  E (electronic)
• Dielectric strength
  max. 30 V DC (Load circuit)
• Output voltage status output
  24 V DC
• Designation
  Shipbuilding approval
• ECLASS 4.0
  27141100
• ECLASS 11.0
  27140401
• ECLASS 7.0
  27141116
• ETIM 4.0
  EC000899
• UNSPSC 6.01
  30211812
• UNSPSC 13.2
  39121410
• UNSPSC 21.0
  39121410
• Depth
  52 mm
• Degree of protection
  IP30 (Actuation area)
• Degree of pollution
  2
• Rated surge voltage
  0.5 kV
• Active current limitation
  typ. 1.25 x IN
Required backup fuse
not required, integrated failsafe element
Undervoltage switch-off load circuit
< 14 V (typ. OFF)
Output current status output
max. 0.2 A (Short-circuit-proof)
Current consumption reset input
typ. 2.6 mA (at 24 V DC)
Standards/specifications
EMV EN 61000-6-3 Interference emission
Identification
DNV GL
ECLASS 4.1
27141100
ECLASS 6.0
27141100
ETIM 3.0
EC000899
UNSPSC 7.0901
39121411
UNSPSC 12.01
39121411
Vibration (operation)
3g (according to IEC 60068-2-6, Test Fc)
Mounting type
on base element
Type
Male
Temperature derating
9 A (at 50 °C)
Shutdown time load circuit
80 ms (see time/current characteristic curve)
Input voltage reset input
max. 30 V DC
Voltage reset input
< 3 V DC (Low state)
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.0
27141100
ECLASS 9.0
27141116
UNSPSC 11
39121411
UNSPSC 19.0
39121410
Height
45 mm
Color
gray
Fuse type
electronic
Nominal current IN
10 A
Power dissipation
1.46 W (Nominal operation)
Max. capacitive load load circuit
20000 µF
Pulse length reset input
min. 20 ms
Auxiliary type of contact
Positive-switching signal output
ECLASS 10.0.1
27140401
ECLASS 5.1
27141100
ETIM 6.0
EC000899
ETIM 7.0
EC000899
UNSPSC 18.0
39121410
UNSPSC 20.0
39121410
Ambient temperature (operation)
-25 °C ... 50 °C (non-condensing)
Humidity test
96 h, 95 % RH, 40 °C
Flammability rating according to UL 94
V-0
Rated insulation voltage Ui
30 V (Load circuit)
Closed circuit current I0
typ. 8 mA (When switched on)
Voltage drop
120 mV (at IN)