2770011 Phoenix Contact Terminal Blocks

Product Details

• Length
  56 mm
• Number of levels
  2
• Flammability rating according to UL 94
  V0
• Overvoltage category
  III
• Connection in acc. with standard
  CSA
• Finger protection
  guaranteed
• Result of flexion and pull-out test
  Test passed
• Tractive force setpoint
  60 N
• Result of voltage-drop test
  Test passed
• Conductor cross section short circuit testing
  4 mm²
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Degree of pollution
  3
• Nominal voltage UN
  500 V
• Surge voltage test setpoint
  7.3 kV
• Bending test turns
  135
• Setpoint
  1 N
• Short-time current
  0.48 kA
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
Width
5.2 mm
Height NS 32
67 mm
Conductor cross section AWG min.
24
Cross section with insertion bridge, stranded max.
2.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Tightening torque max
0.6 Nm
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
27141100
ECLASS 6.0
27141100
ETIM 6.0
EC000897
UNSPSC 11
39121410
UNSPSC 19.0
39121410
Insulating material
PA
Rated surge voltage
6 kV
Maximum power dissipation for nominal condition
0.77 W (the value is multiplied when connecting multiple levels)
Maximum load current
32 A (with 4 mm² conductor cross section)
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Tight fit on carrier
NS 32/NS 35
Requirements, voltage drop
≤ 3.2 mV
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
End cover width
2.5 mm
Height NS 35/15
69.5 mm
Conductor cross section solid max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Cross section with insertion bridge, solid max.
2.5 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
ECLASS 7.0
27141120
UNSPSC 7.0901
39121410
Nominal cross section
2.5 mm²
Insulating material group
I
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Power frequency withstand voltage setpoint
1.89 kV
Tensile test result
Test passed
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
ETIM 2.0
EC000897
ETIM 4.0
EC000897
UNSPSC 18.0
39121410
Number of connections
4
Color
gray
Nominal current IN
24 A
Open side panel
Yes
Result of surge voltage test
Test passed
Bending test rotation speed
10 rpm
Conductor cross section tensile test
4 mm²
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/7,5
62 mm
Connection method
Screw connection
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Stripping length
8 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 5.0
27141100
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
2 conductors with same cross section, solid max.
1 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Screw thread
M3
Tightening torque, min
0.5 Nm
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27141100
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410