2727365 Phoenix Contact Programmable Logic Controllers

Product Details

• Height
  224 mm
• Permissible humidity (storage/transport)
  10 % ... 85 % (non-condensing)
• Designation
  Segment circuit supply (US)
• Transmission speed
  500 kbps
• Permissible conductor cross section
  1 mm² ... 2.5 mm²
• Operating voltage
  200 V AC ... 600 V AC +0 %
• Depth
  109 mm
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Ambient temperature (storage/transport)
  -25 °C ... 85 °C
• Air pressure (storage/transport)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
• Connection method
  COMBICON
• Designation connection point
  Terminal strip X10
• Frequency range
  50 Hz ... 60 Hz
• Overspeed tripping
  ≥ 40 A (after 0.3 seconds)
• Input name
  Digital inputs
• Power consumption
  max. 4.2 W (entire device)
• Net weight
  550 g
• Immunity to burst
  Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B; Supply lines: 2 kV; Signal/data lines: 2 kV
• Mechanical tests
  Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 1g, evaluation criterion 1
• ECLASS 4.0
  27250300
ECLASS 11.0
27242609
ECLASS 9.0
27242609
ETIM 6.0
EC001605
UNSPSC 11
43172015
UNSPSC 12.01
43201404
UNSPSC 18.0
32151602
Ambient temperature (operation)
-25 °C ... 55 °C
Degree of protection
IP20
Transmission physics
Copper
Max. current carrying capacity
20 A
Switching rate
max. 5 cycles per minute
Connection technology
COMBICON
Current consumption
max. 160 mA
Diagnostics messages
Overcurrent Error message in the diagnostic code (bus) and display via the LED ERR on the module
Operating mode
Process data mode with one byte
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, supply lines DC: 0.5 kV/0.5 kV (symm./asymm.), criterion B, supply lines AC: 2 kV/4 kV (symm./asymm.)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
27250300
ECLASS 5.0
27250300
ETIM 3.0
EC001601
ETIM 7.0
EC001605
UNSPSC 19.0
32151602
Width
63 mm
Permissible humidity (operation)
10 % ... 85 % (non-condensing)
Air pressure (operation)
80 kPa ... 106 kPa (up to 2000 m above sea level)
Note
Notes on operation Line protection for the network supply line, max. 20 A. Observe derating of the POWER-COMBICON connector
Number
1
Number of positions
4
Output name
Motor output
Parameterization range
0.2 A ... 8 A (steps of 50/100/200 mA, via fieldbus)
Nominal current range
0.2 A ... 8 A
Number of inputs
1
Supply voltage
24 V DC (via voltage jumper)
Mounting type
DIN rail
Assembly instructions
To safeguard sufficient ventilation, ensure that there is an installation clearance of a minimum of 50 cm both above and below.
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, field strength: 3 V/m
Interference emission
Noise emission test as per EN 61000-6-4 Radio interference properties EN 55011 Class A
REACh SVHC
Lead 7439-92-1
ECLASS 7.0
27242609
ETIM 2.0
EC001433
UNSPSC 6.01
43172015
UNSPSC 13.2
32151602
UNSPSC 21.0
32151602
Type of contact
Solid-state contact
Filter time
0.2 ms
Supply voltage range
19.2 V DC ... 28.8 V DC (including all tolerances, including ripple)
Note on weight specifications
without plug
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 6 kV contact discharge, criterion B, 8 kV air discharge, criterion B
Mounting position
Panel mounting on horizontal DIN rail
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
ECLASS 6.0
27242600
ETIM 4.0
EC001601
UNSPSC 7.0901
43201404
UNSPSC 20.0
32151602
ECLASS 10.0.1
27242609
Protection class
I (МЭК 61140, EN 61140, VDE 0140-1)
ECLASS 5.1
27242600