2716305 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  4
• Degree of pollution
  3
• Nominal voltage UN
  500 V
• Finger protection
  guaranteed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test rotation speed
  10 (+/- 2) rpm
• Tight fit on carrier
  NS 32/NS 35
• Conductor cross section short circuit testing
  4 mm²
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Acceleration
  30g
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Tightening torque, min
  0.6 Nm
• Number of levels
  1
• Nominal cross section
  4 mm²
• Flammability rating according to UL 94
  V0
• Maximum power dissipation for nominal condition
  1.02 W
• Back of the hand protection
  guaranteed
Bending test turns
135
Tensile test result
Test passed
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test duration per axis
5 h
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
20 mm
Stripping length
8 mm
Connection in acc. with standard
CUL
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Number of positions
2
Color
orange
Insulating material group
I
Open side panel
No
Shock protection test specification
IEC 60529:2001-02
Result of power-frequency withstand voltage test
Test passed
Tractive force setpoint
60 N
Requirements, voltage drop
U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
Short circuit stability result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Shock form
Half-sine
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height
24 mm
Conductor cross section solid max.
4 mm²
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 6.0
27141100
ETIM 3.0
EC001284
UNSPSC 7.0901
39121410
UNSPSC 6.01
30211811
Insulating material
PA
Rated surge voltage
6 kV
Maximum load current
32 A (with 4 mm² conductor cross section)
Terminal block mounting
When attaching the product to the mounting surface, please ensure that the housing is not damaged when tightening the center screw
Result of surge voltage test
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of voltage-drop test
Test passed
Short-time current
0.48 kA
ASD level
6.12 (m/s2)2/Hz
Shock duration
18 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection method
Screw connection
Screw thread
M3
Max. AWG conductor cross section, flexible
12
2 conductors with same cross section, solid min.
0.2 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 4.1
27141100
ETIM 2.0
EC001284
UNSPSC 13.2
39121409
UNSPSC 21.0
39121410
Potentials
1
Overvoltage category
III
Nominal current IN
32 A
Surge voltage test setpoint
7.2 kV
Result of flexion and pull-out test
Test passed
Conductor cross section tensile test
4 mm²
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Length
22 mm
Tightening torque max
0.8 Nm
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27141100
ECLASS 9.0
27141120
ETIM 7.0
EC001284
UNSPSC 18.0
39121410
Conductor cross section solid min.
0.2 mm²
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Internal cylindrical gage
A3
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
ECLASS 5.0
27141100
ECLASS 7.0
27141106
ETIM 6.0
EC001284
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.0
27141100
ETIM 4.0
EC001284
UNSPSC 11
39121410
UNSPSC 19.0
39121410