2708562 Phoenix Contact Data & Networking Devices

Product Details

• Altitude
  ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation)
• Noise immunity
  EN 61000-6-2:2005
• China RoHS
  Environmentally Friendly Use Period = 50 years
• Degree of protection
  IP20
• Conductor cross section solid max.
  2.5 mm²
• Ambient temperature (operation)
  -20 °C ... 60 °C
• Bit distortion, input
  ± 35 % (permitted)
• Conductor cross section flexible max.
  2.5 mm²
• Transmission protocol
  Protocol-transparent to the RS-485 interface
• Test voltage data interface/power supply
  1.5 kVrms (50 Hz, 1 min.)
• Number of outputs
  1
• Limiting continuous current
  0.46 A
• Test result
  15g, 11 ms period, half-sine shock pulse
• ECLASS 11.0
  19170411
• Comments
  Criterion B
• Electrical isolation
  VCC // RS-485
• REACh SVHC
  Lead 7439-92-1
• ECLASS 5.1
  27230200
• ETIM 3.0
  EC001423
• UNSPSC 11
  39121008
Permissible humidity (operation)
30 % ... 95 % (non-condensing)
Ambient temperature (storage/transport)
-40 °C ... 85 °C
UNSPSC 19.0
43223323
Color
green
Conductor cross section solid min.
0.2 mm²
Transmission length incl. 3 dB system reserve
25 km (With F-G 50/125 0.7 dB/km at 1300 nm)
Identification
ISA-S71.04-1985 G3 Harsh Group A
UNSPSC 12.01
39121008
UNSPSC 18.0
43223323
UNSPSC 21.0
43223323
Interface 1
RS-485 interface, 2-wire
Termination resistor
390 Ω
Wavelength
1300 nm
Designation
Corrosive gas test
Bit distortion, output
< 6.25 %
Free from substances that could impair the application of coating
according to P-VW 3.10.7 57 65 0 VW-AUDI-Seat central standard
Electromagnetic compatibility
Conformance with EMC directive 89/336/EC
Net weight
225.3 g
Max. current consumption
90 mA
Contact discharge
± 6 kV
Width
35 mm
Height
99 mm
ECLASS 4.0
27230200
ETIM 4.0
EC001423
ETIM 2.0
EC001423
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
ECLASS 4.1
27230200
ECLASS 7.0
19179290
Depth
105 mm
Connection method
SC duplex
Data direction switching
Automatic control
Conductor cross section flexible min.
0.2 mm²
Output description
Alarm output
Type of test
Shock in acc. with EN 60068-2-27/IEC 60068-2-27
Connection in acc. with standard
CUL
ETIM 6.0
EC001467
UNSPSC 6.01
30211506
Noise emission
EN 55011
Mounting type
DIN rail mounting
Housing material
PA 6.6-FR
UNSPSC 13.2
43222604
UNSPSC 20.0
43223323
Signal
± 1 kV
ECLASS 10.0.1
19170132
Conductor cross section AWG max.
14
Maximum switching voltage
60 V DC
Output name
Relay output
Additional text
Please follow the special installation instructions in the documentation!
MTBF
484 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day))
Standards/regulations
EN 55011
File format/coding
UART (11/10 bit switchable; NRZ), slip-tolerant
ECLASS 5.0
27230200
ECLASS 9.0
19170114
ETIM 7.0
EC001467
Supply voltage range
18 V DC ... 32 V DC
Transmission medium
Multi-mode fiberglass
Operating mode
Semi-duplex
Typical current consumption
55 mA (24 V DC)
ECLASS 6.0
19179200
UNSPSC 7.0901
39121008
Nominal supply voltage
24 V DC (in acc. with UL)
Transmission length
≤ 1200 m (depending on the data rate, with shielded, twisted data cable)
Serial transmission speed
4.8/ 9.6/ 19.2/ 38.4/ 57.6/ 75/ 93.75/ 115.2/ 136/ 187.5/ 375/ 500 kbps
Conductor cross section AWG min.
24
No. of channels
1