2703994 Phoenix Contact Programmable Logic Controllers

Product Details

• Height
  119.8 mm
• Permissible humidity (storage/transport)
  10 % ... 95 % (non-condensing)
• Net weight
  335.7 g
• Number
  2
• Description of the input
  EN 61131-2 type 1
• Typical response time
  approx. 500 µs
• Input voltage range "0" signal
  -30 V DC ... 5 V DC
• Nominal load, lamp
  12 W
• Behavior with inductive overload
  Output can be destroyed
• Immunity to ESD
  Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
• Immunity to conducted interference
  Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
• ECLASS 5.1
  27242600
• ECLASS 4.1
  27250200
• ETIM 2.0
  EC001434
• ETIM 7.0
  EC001604
• Nominal input voltage UIN
  24 V DC
• Typical input current per channel
  typ. 3 mA
• Nominal load, inductive
  12 VA (1.2 H, 48 Ω)
• Number of outputs
  4
• Depth
  71.5 mm
Permissible humidity (operation)
10 % ... 95 % (non-condensing)
Connection technology
3-conductor
Power consumption
typ. 3 W (entire device)
Note on dimensions
Specfications with connectors
Air pressure (operation)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Connection method
Inline connector
Protective circuit
Short-circuit and overload protection Freewheeling circuit in the output driver
Input voltage range "1" signal
15 V DC ... 30 V DC
Delay at signal change from 0 to 1
5 ms
Output voltage
24 V DC -1 V (At nominal current)
Behavior with overload
Auto restart
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, supply lines DC: 0.5 kV/0.5 kV (symmetrical/asymmetrical), fieldbus cable shield 1 kV
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 7.0
27242608
Width
80 mm
Ambient temperature (operation)
-25 °C ... 55 °C (observe derating)
Degree of protection
IP20
Color
green
Mounting type
DIN rail mounting
Designation
Segment circuit supply (US)
Amount of process data
max. 488 Byte (max. 244 bytes IN - max. 244 bytes OUT)
Filter time
3 ms
Output name
Digital outputs
Nominal load, ohmic
12 W
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
Interference emission
Noise emission test as per EN 61000-6-4 Class A
ECLASS 4.0
27250200
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Note on weight specifications
with connectors
Number of inputs
8
Nominal input current at UIN
typ. 3 mA
Input voltage
24 V DC
Delay at signal change from 1 to 0
5 ms
Nominal output voltage
24 V DC
Limitation of the voltage induced on circuit interruption
approx. -30 V
Reverse voltage resistance to short pulses
Reverse voltage proof
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
ECLASS 11.0
27242608
ECLASS 10.0.1
27242608
ETIM 3.0
EC001604
UNSPSC 12.01
43201404
UNSPSC 21.0
32151602
ECLASS 6.0
27242600
Transmission speed
500 kbps / 2 Mbps (automatic detection, no combined system)
Number of devices with parameter channel
max. 16
Power supply unit
max. 8 A DC (Sum of UM + US; 4 A, maximum, when used in potentially explosive areas.)
REACh SVHC
Lead 7439-92-1
Supply current
138 mA
Current consumption
min. 3 mA (without actuators)
Number of local bus devices that can be connected
max. 61 (The on-board I/Os are two devices)
Supply voltage
24 V DC (via Inline connector)
Input name
Digital inputs
ECLASS 9.0
27242608
UNSPSC 19.0
32151602
Diagnostics messages
Short-circuit or overload of the digital outputs Yes
Number of supported devices
max. 63 (per station)
Power dissipation
typ. 3 W (entire device)
Output current when switched off
max. 10 µA (When not loaded, a voltage can be measured even at an output that is not set.)
UNSPSC 6.01
43172015
UNSPSC 11
43172015
Transmission physics
Ethernet in RJ45 twisted pair
Number of supported branch terminals with remote bus branch
0
Supply voltage range
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
ECLASS 5.0
27250200
ETIM 6.0
EC001604
UNSPSC 13.2
32151602
UNSPSC 20.0
32151602
UNSPSC 18.0
32151602
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion A, all interfaces 1 kVCriterion B, all interfaces 2 kV
ETIM 4.0
EC001604
UNSPSC 7.0901
43201404