2702971 Phoenix Contact Electrical Measuring & Monitoring Instruments

Product Details

• Width
  10 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Maximum altitude
  ≤ 2000 m (Above sea level)
• Depth
  112 mm
• Max. permissible humidity (storage/transport)
  75 % (on average, 85% infrequently, non-condensing)
• Inrush current
  min. 1 mA
• Filter time
  max. 3 ms (at pins 05/06 in the event of voltage dips at Us)
• Output name
  Confirmation current path
• Switching voltage
  min. 19.2 V DC
• Limiting continuous current
  100 mA
• Switching capacity according to IEC 60947-5-1
  3 A (24 V (DC13))
• Recovery time
  500 ms
• Net weight
  51.124 g
• Assembly instructions
  See derating curve
• Status display
  2 x LED bi-color (green, red)
• Housing color
  yellow
• Stop category
  0
• Standards/regulations
  DIN EN 50178, EN 60079-15
• Shock
  15 g (in the event of continuous stress caused by shock, contact reactions are possible.)
• REACh SVHC
  Lead 7439-92-1
Ambient temperature (operation)
-40 °C ... 70 °C (observe derating)
Power consumption at US
typ. 0.77 W
Inrush current at UD
typ. 200 mA (Δt < 1 ms; at pins 04/03 for UD)
Input current at UD
7 mA (at pins 04/03 for UD; + 100 mA depending on load at pin 02)
Contact type
1 confirmation current path
Switching capacity
min. 20 mW
Typical release time at US
30 ms (when controlled via pins 05/06)
Mounting position
vertical or horizontal
Height
75 mm
Max. permissible relative humidity (operation)
75 % (on average, 85% infrequently, non-condensing)
Rated control circuit supply voltage US
24 V DC -20 % / +25 %
Rated control supply current IS
typ. 25 mA
Number of outputs
1 (undelayed)
Output description
Safety-related N/C contacts
Sq. Total current
9 A2 (observe derating)
Output fuse
150 mA Fast-blow
Nominal operating mode
100% operating factor
Degree of protection
IP20
Designation
Air clearances and creepage distances between the power circuits
Safety Integrity Level Claim Limit (SIL CL)
3
Rated surge voltage/insulation
Basic insulation 4 kV between all current paths and housing
Overvoltage category
III
China RoHS
Environmentally Friendly Use Period = 50 years
ETIM 6.0
EC001449
Vibration (operation)
10 Hz ... 150 Hz, 2g
ECLASS 5.1
27371901
Diagnostic supply voltage UD
24 V DC -20 % / +25 % (at pin 04)
Protective circuit
Surge protection 35 V suppressor diode (pins 05/06)33 V suppressor diode (pins 04/03)35 V suppressor diode (pins 02/03)
Contact material
AgCuNi, + Au
Mechanical service life
10x 106 cycles
Typical pickup time at US
150 ms (when controlled via pins 05/06)
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Mounting type
Plug-in mounting
Housing material
PA 6.6
pluggable
Yes
Safety Integrity Level (SIL)
3 (Reference IEC 61508)
Rated insulation voltage
250 V AC
Degree of pollution
2
Environmental simulation test
ISA-S71.04 (G3)
ECLASS 6.0
27371819
Min. degree of protection of inst. location
IP54
Connection method
Pluggable onto VIP base module
Category
4
Performance level (PL)
e
Conformance
CE-compliant
ECLASS 10.0.1
27371819
ECLASS 11.0
27371819
ETIM 7.0
EC001449
ECLASS 9.0
27371819