2702924 Phoenix Contact Electrical Safety Devices

Product Details

• Width
  22.5 mm
• Maximum altitude
  ≤ 2000 m (Above sea level)
• Typ. starting time with Us
  < 100 ms (when controlled via A1)
• Height
  99 mm
• Max. permissible relative humidity (operation)
  75 % (on average, 85% infrequently, non-condensing)
• Power consumption at US
  max. 1.5 W (with DC)
• Protective circuit
  Surge protection Suppressor diode and varistors
• Minimum switching voltage
  5 V AC/DC
• Switching capacity
  min. 50 mW
• Ambient temperature (operation)
  -20 °C ... 55 °C (observe derating)
• Rated control circuit supply voltage US
  42 V AC/DC ... 230 V AC/DC -15 % ... +10 % (Rated control circuit supply voltage US)
• Recovery time
  < 1 s
• Contact material
  AgSnO2
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Rated control supply current IS
  typ. 35 mA (42 V DC)
• Typical release time
  < 20 ms (Control via A1 at 42 V DC)
• Maximum switching frequency
  0.5 Hz
• Maximum switching voltage
  250 V AC/DC (Observe the load curve)
• Inrush current, minimum
  10 mA
Sq. Total current
72 A2 (observe derating)
Mechanical service life
10x 106 cycles
Nominal operating mode
100% operating factor
Min. degree of protection of inst. location
IP54
Connection method
Screw connection
Stop category
0
Safety Integrity Level (SIL)
3
Category
4 (In conjunction with suitable evaluating device)
Overvoltage category
III
Conformance
CE-compliant
ECLASS 10.0.1
27371819
ETIM 6.0
EC001449
Depth
114.5 mm
Max. permissible humidity (storage/transport)
75 % (on average, 85% infrequently, non-condensing)
Inrush current
< 38 A (Δt = 50 µs at Us)
Operating voltage display
1 x green LED
Contact type
4 enabling current paths
Maximum inrush current
8 A
Interrupting rating (ohmic load) max.
1500 VA (N/O contact, 250 V AC, τ = 0 ms)
Switching capacity according to IEC 60947-5-1
5 A (24 V (DC13))
Mounting position
vertical or horizontal
Degree of protection
IP20
Housing material
PBT
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Screw thread
M3
Performance level (PL)
e (In conjunction with suitable evaluating device)
Rated insulation voltage
250 V AC
Vibration (operation)
10 Hz ... 150 Hz, 2g
ECLASS 11.0
27371819
ECLASS 9.0
27371819
Limiting continuous current
6 A (N/O contact, pay attention to the derating)
Output fuse
6 A gL/gG (N/O contact and N/C contact 61/62)
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Assembly instructions
See derating curve
Housing color
yellow
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Stripping length
7 mm
Safety Integrity Level Claim Limit (SIL CL)
3 (In conjunction with suitable evaluating device)
Rated surge voltage/insulation
Safe isolation, reinforced insulation 6 kV:between (A1/A2) and the remaining current pathsbetween (51/52) and the remaining current pathsbetween (61/62) and the remaining current pathsbetween (13/14, 23/24, 33/34, 43/44) and the remaining current paths
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27371901
Maximum interrupting rating (inductive load)
48 W (N/O contact, 24 V DC, τ = 40 ms)
Net weight
199 g
Mounting type
DIN rail mounting
pluggable
Yes
Conductor cross-section AWG
24 ... 12
Designation
Air clearances and creepage distances between the power circuits
Standards/regulations
DIN EN 50178/VDE 0160
Degree of pollution
2
Shock
15g
ECLASS 6.0
27371800
ECLASS 7.0
27371819
ETIM 7.0
EC001449