2702887 Phoenix Contact Data & Networking Devices

Product Details

• Depth
  126 mm
• Electrical isolation
  VCC // LTE // Ethernet // PE
• Housing material
  Plastic
• Wireless licences
  USA
• Conductor cross section flexible max.
  1.50 mm²
• Conductor cross section flexible min.
  0.14 mm²
• Trade restriction
  The products are offered exclusively for export outside the EU and the European Economic Area.
• Ambient temperature (operation)
  0 °C ... 60 °C
• Permissible humidity (operation)
  10 % ... 95 % (non-condensing)
• Net weight
  347 g
• MTTF
  383 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
• Height
  130 mm
• Noise immunity
  EN 61000-6-2
• Electromagnetic compatibility
  Conformance with EMC Directive 2014/30/EU
• Degree of pollution
  2
• Operating mode
  Indoor use only
• Auxiliary protocols
  ARP, DHCP, PING (ICMP), SNMP V1, SMTP
• Protocols supported
  TCP/IP, UDP/IP, FTP, HTTP
• Country support
  USA
• Voltage output signal
  10 V DC ... 30 V DC (depending on the operating voltage)
Identification
ISA-S71.04-1985 G3 Harsh Group A
Comments
Criterion B
ECLASS 10.0.1
19170502
ECLASS 7.0
19170103
ETIM 7.0
EC001478
Width
45 mm
Permissible humidity (storage/transport)
10 % ... 95 % (non-condensing)
Degree of protection
IP20 (Manufacturer's declaration)
Typical current consumption
< 200 mA (24 V DC)
Conductor cross section AWG max.
16
Transmission length
100 m (shielded twisted pair)
Frequency range
0.15 MHz ... 80 MHz
Data rate
≤ 150 Mbps (LTE (DL))
Security functions
Supported 3DES, AES-128, -192, -256 ESP tunnel X.509v3, PSK MD5, SHA-1 RFC 3706
Current output signal
≤ 50 mA (Not short-circuit proof)
Voltage input signal
10 V DC ... 30 V DC
Test result
15g
China RoHS
Environmentally Friendly Use Period = 50 years
Designation
Corrosive gas test
Utilization restriction
Use in potentially explosive areas is not permitted in China.
Ambient temperature (storage/transport)
0 °C ... 60 °C
Color
gray
Supply voltage range
10 V DC ... 30 V DC (SELV)
Conductor cross section solid max.
1.50 mm²
Conductor cross section AWG min.
26
Connection method
RJ45 jack, shielded
Antenna
50 Ω impedance SMA antenna socket
Management
Web-based management, SNMP
Output name
Digital output
Number of outputs
1
Standards/regulations
EN 61000-4-6
ECLASS 5.0
19030100
ETIM 6.0
EC001478
Conductor cross section solid min.
0.14 mm²
Interface 1
Ethernet interface, 10/100Base-T(X) in accordance with IEEE 802.3
Interface
Ethernet
Serial transmission speed
10/100 Mbps, auto negotiation
LTE
CAT4
Number of VPN tunnels
1
Description of the input
Digital input
Switching level "1" signal
10 V DC ... 30 V DC
Contact discharge
± 6 kV (Test Level 3)
ECLASS 11.0
19170502
ECLASS 5.1
19030100
ECLASS 6.0
19170100
No. of ports
2 (SELV)
Interface description
LTE (FDD)
SIM interface 1
1.8 volt, 3 volt
Web-based management
yes
Number of inputs
1
Type of test
Shock in acc. with EN 60068-2-27/IEC 60068-2-27
Signal
± 1 kV (Data line, asymmetrical)
ECLASS 9.0
19170103