2702636 Phoenix Contact Data & Networking Devices

Product Details

• Depth
  73 mm
• Mounting type
  DIN rail mounting
• REACh SVHC
  Lead 7439-92-1
• ECLASS 5.1
  19070400
• ETIM 4.0
  EC000310
• Housing material
  PA 6.6-FR
• Conductor cross section AWG max.
  16
• Designation
  Corrosive gas test
• Contact discharge
  ± 6 kV (Test Level 3)
• Standards/regulations
  EN 55011
• Comments
  Criterion B
• ECLASS 4.1
  27240400
• ETIM 6.0
  EC000448
• Caption
  Compact housing
• Test voltage data interface/power supply
  1.5 kV AC (50 Hz, 1 min.)
• Net weight
  74.65 g
• Supply voltage range
  18 V DC ... 30 V DC (via pluggable COMBICON screw terminal block)
• Conductor cross section flexible min.
  0.2 mm²
• Permissible humidity (operation)
  10 % ... 95 % (non-condensing)
• Conductor cross section solid min.
  0.2 mm²
Termination resistor
390 Ω
Output nominal voltage
5 V DC
Additional text
Please follow the special installation instructions in the documentation!
Electrical isolation
DIN EN 50178 (RS-485 // VCC)
MTTF
3305 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
Conductor cross section flexible max.
1.5 mm²
ECLASS 9.0
19070403
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (operation)
-40 °C ... 70 °C
Min. AWG conductor cross section, flexible
24
Transmission length
≤ 1200 m (Depends on transmission speed and cable type)
UNSPSC 11
39121008
China RoHS
Environmentally Friendly Use Period = 50 years
UNSPSC 21.0
32121617
UNSPSC 18.0
32121617
ECLASS 7.0
19070403
Conductor cross section solid max.
1.5 mm²
Interface 1
PROFIBUS acc. to IEC 61158, RS-485 2-conductor
Height
92 mm
Altitude
≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation)
Degree of protection
IP20
Degree of pollution
2
Nominal supply voltage
24 V DC (via pluggable COMBICON screw terminal block)
Width
22.5 mm
Max. AWG conductor cross section, flexible
12
Connection method
D-SUB 9, COMBICON
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Color
green
Serial transmission speed
≤ 12 Mbps
Identification
ISA-S71.04-1985 G3 Harsh Group A
Test result
25g, 11 ms period, half-sine shock pulse
Indirect discharge
± 6 kV
Overvoltage category
II
Max. current consumption
12 mA (18 V DC, no load on D-SUB)
Typical current consumption
10 mA (24 V DC, no load on D-SUB)
UNSPSC 6.01
30211506
UNSPSC 20.0
32121617
UNSPSC 12.01
39121008
ECLASS 10.0.1
19070403
ECLASS 6.0
19070400
ECLASS 4.0
27240400
Conductor cross section AWG min.
24
Status and diagnostic indicators
LEDs: US (power supply), ACT (data activity)
Type of test
Shock in acc. with EN 60068-2-27/IEC 60068-2-27
Signal
± 1 kV (Data line, asymmetrical)
Frequency range
0.15 MHz ... 80 MHz
ECLASS 11.0
19070403
ECLASS 5.0
19070400
ETIM 3.0
EC000673
ETIM 7.0
EC000448
UNSPSC 7.0901
39121008
UNSPSC 13.2
32121617
UNSPSC 19.0
32121617
Free from substances that could impair the application of coating
according to P-VW 3.10.7 57 65 0 VW-AUDI-Seat central standard