2702528 Phoenix Contact Data & Networking Devices

Product Details

• Comments
  Criterion B
• Depth
  126 mm
• Altitude
  ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation)
• Housing material
  Plastic
• Supply voltage range
  10 V DC ... 30 V DC (Via pluggable Push-in terminal block)
• Connection method
  RJ45 jack, shielded
• Conductor cross section flexible max.
  1.50 mm²
• Conductor cross section AWG max.
  16
• Protocols supported
  TCP/IP, UDP/IP, FTP, HTTP(S)
• Antenna
  50 Ω impedance SMA antenna socket
• LTE
  CAT4
• Number of VPN tunnels
  3
• Permissible humidity (operation)
  10 % ... 95 % (non-condensing)
• Electrical isolation
  VCC // LTE // Ethernet // PE
• MTTF
  383 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
• Typical current consumption
  < 200 mA (24 V DC)
• Conductor cross section AWG min.
  26
• No. of ports
  2
• Transmission length
  100 m (shielded twisted pair)
• Interface description
  GSM / GPRS / EDGE / UMTS / HSPA / LTE (FDD)
EDGE
Multislot Class 10
Management
Web-based management, SNMP
Output name
Digital output
Current output signal
≤ 50 mA (Not short-circuit proof)
Designation
Corrosive gas test
ECLASS 5.0
19030100
ETIM 7.0
EC001478
Width
45 mm
Ambient temperature (operation)
-40 °C ... 70 °C (Maximum transmission power 5 dBm)
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Noise immunity
EN 61000-6-2
Mounting type
DIN rail mounting
Wireless licences
Europe
Conductor cross section flexible, with ferrule without plastic sleeve
0.25 mm² ... 1.5 mm²
Conductor cross section solid max.
1.50 mm²
Conductor cross section solid min.
0.14 mm²
Auxiliary protocols
ARP, DHCP, PING (ICMP), SNMP V1/V2, SMTP(S), NTP, SSL/TLS, STARTTLS
Data rate
≤ 150 Mbps (LTE (DL))
GPRS
Class 12, Class B
Country support
Europe
Security functions
Supported 3DES, AES-128, -192, -256 ESP tunnel X.509v3, PSK MD5, SHA-1 RFC 3706 IP, port, protocol
Description of the input
Digital input
Number of inputs
2
Type of test
Shock in acc. with EN 60068-2-27/IEC 60068-2-27
Signal
± 1 kV (Data line, asymmetrical)
ECLASS 4.0
27230200
ECLASS 9.0
19170103
Height
130 mm
Permissible humidity (storage/transport)
10 % ... 95 % (non-condensing)
Electromagnetic compatibility
Conformance with RED Directive 2014/53/EU
Color
gray
Conductor cross section, flexible, with ferrule, with plastic sleeve
0.25 mm² ... 0.75 mm²
Stripping length
9 mm
Interface
Ethernet
Serial transmission speed
10/100 Mbps, auto negotiation
Test result
15g
Contact discharge
± 6 kV (Test Level 3)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
27230200
ECLASS 6.0
19170100
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Degree of protection
IP20
Net weight
240 g
Max. current consumption
1.7 A
Conductor cross section flexible min.
0.14 mm²
Interface 1
Ethernet interface, 10/100Base-T(X) in accordance with IEEE 802.3
Frequency range
0.15 MHz ... 80 MHz
SIM interface 1
1.8 volt, 3 volt
UMTS
HSPA 3GPP R9
Web-based management
yes
Number of outputs
1
Switching level "1" signal
10 V DC ... 30 V DC
Standards/regulations
EN 61000-4-6
ECLASS 10.0.1
19170502
ECLASS 7.0
19170103
Voltage output signal
10 V DC ... 30 V DC (depending on the operating voltage)
Voltage input signal
10 V DC ... 30 V DC
Identification
ISA-S71.04-1985 G3 Harsh Group A
ECLASS 11.0
19170502
ECLASS 5.1
19030100
ETIM 6.0
EC001478