2702522 Phoenix Contact Electrical Safety Devices

Product Details

• Width
  17.5 mm
• Max. permissible relative humidity (operation)
  75 % (on average, 85% infrequently, non-condensing)
• Maximum altitude
  ≤ 2000 m (Above sea level)
• Power consumption at UD
  typ. 0.9 W (at UD; Off state)
• Protective circuit
  Surge protection 36 V suppressor diode (A1-A2)33 V suppressor diode (24V-GND)
• Current consumption
  typ. 20 mA (Input TP1)
• Number of outputs
  1 (without delay, floating)
• Relay type
  Electromechanical relay
• Status display
  1 x yellow LED, 1 x green LED, 1 x red LED
• Conductor cross section solid
  0.2 mm² ... 2.5 mm²
• Standards/regulations
  DIN EN 50178
• Rated surge voltage/insulation
  Basic insulation 4 kV between all current paths and housing
• Conformance
  CE-compliant
• ECLASS 5.1
  27371901
• Depth
  114.5 mm
• Max. permissible humidity (storage/transport)
  75 % (on average, 85% infrequently, non-condensing)
• Rated control supply current IS
  typ. 75 mA
• Filter time
  2 ms (at A1-A2 in the event of voltage dips at Us)
• Description of the input
  Test point for proof test
• Contact type
  1 signaling current path
Switching voltage
min. 16 V AC/DC
Switching frequency
max. 0.5 Hz
Typical release time at US
typ. 30 ms (when controlled via A1-A2)
Mounting position
vertical or horizontal
Housing color
yellow
pluggable
Yes
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Degree of pollution
2
Environmental simulation test
ISA-S71.04 (G3)
ECLASS 6.0
27371800
Ambient temperature (operation)
-25 °C ... 60 °C (observe derating)
Air pressure (operation)
79 kPa ... 106 kPa
Inrush current
max. 800 mA (Δt  100 ms)
Input current at UD
35 mA (at UD = 24 V)
Output name
Signaling current path
Contact material
AgNi, gold-flashed, Ag alloy
Switching capacity
min. 1 W
Short-circuit protection
no
Typical pickup time at US
typ. 100 ms (when controlled via A1-A2)
Degree of protection
IP20
Min. degree of protection of inst. location
IP54
Connection method
Screw connection
Screw thread
M3
Rated insulation voltage
250 V AC
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 7.0
27371819
ETIM 6.0
EC001449
Height
112.2 mm
Rated control circuit supply voltage US
24 V DC -15 % / +10 %
Power consumption at US
typ. 2 W (at US/UD; On state)
Type of protection
Surge protection
Output description
non-safety-related N/C contact
Sq. Total current
9 A2 (observe derating)
Mechanical service life
approx. 5x 107 cycles
Recovery time
1 s (when controlled via A1-A2)
Assembly instructions
See derating curve
Housing material
Frianyl A 63 R V0
Stripping length
7 mm
Designation
Air clearances and creepage distances between the power circuits
Vibration (operation)
10 Hz ... 150 Hz, 2g
REACh SVHC
Lead 7439-92-1
ECLASS 9.0
27371819
ETIM 7.0
EC001449
Utilization restriction
Use in potentially explosive areas is not permitted in China.
Ambient temperature (storage/transport)
-40 °C ... 65 °C
Air pressure (storage/transport)
79 kPa ... 106 kPa
Diagnostic supply voltage UD
24 V DC -20 % / +25 %
Inrush current at UD
1.5 A (Δt < 10 µs)
Number of inputs
3
Protective circuit/component
36 V suppressor diode
Limiting continuous current
3 A (Observe derating, load type, and on-load voltage)
Diagnostic threshold
7 Ω ... 20 kΩ (configurable)
Net weight
147.48 g
Nominal operating mode
100% operating factor
Mounting type
DIN rail mounting
Conductor cross-section AWG
24 ... 12
Safety Integrity Level (SIL)
3 (Reference IEC 61508)
Overvoltage category
III
Shock
15g, 11 ms
ECLASS 10.0.1
27371819
ECLASS 11.0
27371819