2702373 Phoenix Contact Programmable Logic Controllers

Product Details

• ECLASS 4.1
  27250300
• ECLASS 11.0
  27242601
• Bridge difference Ud
  Measuring range specified by selecting the characteristic
• Connection technology
  6 or 4-wire, twisted pair shielded cable
• Measured value representation
  16 bit, 20 bit, ASCII data record
• Test section
  Logic 500 V AC 50 Hz 1 min.
• ECLASS 5.1
  27242600
• Output current
  max. 115 mA (per channel)
• Number of outputs
  2
• REACh SVHC
  Lead 7439-92-1
• ECLASS 4.0
  27250300
• ECLASS 7.0
  27242601
• ETIM 7.0
  EC001596
• Impedance
  > 43 Ω (per channel)
• Number of inputs
  2
• Characteristics
  ±1 mV/V, ±2 mV/V, ±3 mV/V, ±3.33 mV/V, ±4 mV/V, ±5 mV/V, ±6 mV/V, manual characteristic value specification
• Output description
  Jumper supply
• ECLASS 10.0.1
  27242601
• ECLASS 6.0
  27242600
• ETIM 3.0
  EC001599
ETIM 6.0
EC001596
Bridge voltage U0
5 V
Description of the input
Input channels for strain gauge
Connection method
Inline data jumper
Height
136 mm
Air pressure (operation)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Designation
Supply of analog modules (UANA)
Net weight
241 g
Current consumption
14 mA (for no-load operation without strain gauge or display)
Width
48.8 mm
Permissible humidity (storage/transport)
10 % ... 95 % (non-condensing)
Operating mode
Process data operation with 3 words, PCP with 1 word
Ambient temperature (operation)
-25 °C ... 55 °C
Depth
71.5 mm
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Color
green
Transmission physics
Copper
ETIM 4.0
EC001599
UNSPSC 7.0901
43201404
UNSPSC 11
43172015
UNSPSC 20.0
32151602
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Permissible humidity (operation)
10 % ... 95 % (non-condensing)
Degree of protection
IP20
Transmission speed
500 kbps
Supply voltage range
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Output voltage
typ. 5 V
UNSPSC 6.01
43172015
UNSPSC 19.0
32151602
Ambient temperature (storage/transport)
-25 °C ... 85 °C
Mounting type
DIN rail
Diagnostics messages
Failure of the power supply at UANA Error message in the process data
ECLASS 5.0
27250300
UNSPSC 12.01
43201404
UNSPSC 18.0
32151602
Supply voltage
24 V DC (via voltage jumper)
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
ECLASS 9.0
27242601
UNSPSC 13.2
32151602
UNSPSC 21.0
32151602
Power consumption
typ. 1.4 W (Device in nominal operation)