2702332 Phoenix Contact Data & Networking Devices

Product Details

• Width
  45 mm
• Permissible humidity (operation)
  10 % ... 95 % (non-condensing)
• Degree of pollution
  2
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Current consumption
  260 mA
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Ambient temperature (operation)
  -40 °C ... 70 °C
• No. of ports
  2 (ST multi-mode)
• ETIM 6.0
  EC000734
• Immunity to conducted interference
  EN 61000-6-2 EN 61000-4-6 (line noise immunity) Criterion A
• Vibration (storage/transport)
  5g, 150 Hz, in acc. with IEC 60068-2-6
• UL, Canada
  CSA C22.2 NO.60079-0, Ed.3 / CSA C22.2 NO.60079-7:16
• ECLASS 11.0
  19170401
• Depth
  115 mm
• Permissible humidity (storage/transport)
  10 % ... 95 % (non-condensing)
• Interface
  Ethernet FO
• Transmission speed
  100 Mbps (full duplex)
• Minimum receiver sensitivity
  -32 dBm
• MTTF
  343.16 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
• Conductor cross section AWG max.
  16
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
ECLASS 4.1
27250501
ECLASS 9.0
19170106
UNSPSC 12.01
43201410
UNSPSC 20.0
43222612
Immunity to burst
EN 61000-6-2 EN 61000-4-4 (EFT burst) Criterion A
UNSPSC 19.0
43222612
Free from substances that could impair the application of coating
Yes
Noise immunity
EN 61000-6-2
IECEx
Ex ec IIC T4 Gc
ECLASS 4.0
27250501
ECLASS 7.0
19170106
Height
130 mm
Degree of protection
IP20
Air pressure (operation)
79 kPa ... 108 kPa up to 2000 m above mean sea level (Without derating)
MAC address table
8k
Note
Support by phone or on-site (fee is charged)
UNSPSC 11
43172015
Conductor cross section flexible min.
0.25 mm²
Conductor cross section solid max.
1.5 mm²
Connection method
Push-in spring connection
Conductor cross section AWG min.
24
Shipbuilding approval
Tested in accordance with IEC 60945 and IACS E10
ATEX
 II 3 G Ex ec IIC T4 Gc
Noxious gas test
ISA S71.04.2013 G3 Harsh Group A
REACh SVHC
Lead 7439-92-1
ECLASS 5.1
19030100
UNSPSC 7.0901
43201404
Immunity to surge
EN 61000-6-2 EN 61000-4-5 (surge) Criterion A
Immunity to ESD
EN 61000-6-2 EN 61000-4-2 (ESD) Criterion B
ECLASS 6.0
19170100
ETIM 3.0
EC000734
UNSPSC 6.01
43172015
Conductor cross section solid min.
0.25 mm²
Stripping length
9 mm
Interference emission
EN 61000-6-2 EN 61000-6-4 (interference) Class A
Immunity to EF
EN 61000-6-2 EN 61000-4-3 (electromagnetic fields) Criterion A
Type of test
Free fall in accordance with EN 61131-2
Shock (operation)
30g (EN 60068-2-27)
UL, USA
UL 60079-0, Ed.6 / UL 60079-7, Ed.5
ECLASS 10.0.1
19170401
ETIM 7.0
EC000734
Vibration (operation)
in acc. with IEC 60068-2-6: 5g, 150 Hz
Noise emission
EN 61000-6-4
UL, USA/Canada
Class I, Div. 2, Groups A, B, C, D T4Class I, Zone 2, IIC T4
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.0
19030100
ETIM 4.0
EC000734
UNSPSC 13.2
43222612
UNSPSC 18.0
43222612
UNSPSC 21.0
43222612
Configuration memory
max. 8 GByte (SD card)
Time synchronization
SNTP (Simple Network Time Protocol)
Signal contact control voltage
typ. 24 V DC
Additional functions
Transmission of MMS and GOOSE (IEC 61850-8-1)
Status and diagnostic indicators
LEDs: US1, US2 (power supply), Fail (alarm contact), 2 LEDs per Ethernet port (Link/Activity and Speed)
Supply voltage range
9 V DC ... 57 V DC
Type AX
Book type
PROFINET device function
PROFINET device
Wavelength
1300 nm
Supply voltage
24 V DC (redundant)
Typical current consumption
255 mA (at US = 24 V DC and 25 °C ambient temperature)
Conductor cross section flexible max.
1.5 mm²
Filter functions
Quality of Service (8 priority classes)
Conducted noise emission
EN 61000-6-2 EN 61000-6-4 (conducted interference) Class A
Management
Web-based management (HTTP/HTTPS)
Diagnostic functions
RMON History
PROFINET conformance class
Conformance-Class B
Port security
MAC-based, RADIUS (IEEE 802.1X)
Maximum conductor length (twisted pair)
100 m
Net weight
413.366 g
IP parameterization
DHCP-Client
Cascading depth
Network, linear, and star structure: any
Mounting type
DIN rail
Housing material
Polycarbonate fiber reinforced
Basic functions
Store-and-forward switch, complies with IEEE 802.3
Signal LEDs
Data receive, link status
Transmission physics
multi-mode fiberglass
Transmit capacity, maximum
-14 dBm
Transmit capacity, minimum
-19 dBm
Maximum receiver sensitivity
-14 dBm
Air pressure (storage/transport)
79 kPa ... 108 kPa up to 2000 m above mean sea level (Without derating)
Redundancy
MRP (Media Redundancy Protocol)
Transmission length
11000 m (fiberglass with F-G 62.5/125 0.7 dB/km F1000)
Residual ripple
3.6 VPP (within the permitted voltage range)
Note on the connection method
Auto negotiation and autocrossing
Max. current consumption
1.5 A (US = Min, Tamb = Max, DOI = Max)