2702253 Phoenix Contact Data & Networking Devices

Product Details

• Conductor cross section solid min.
  0.2 mm²
• Indirect discharge
  ± 6 kV
• REACh SVHC
  Lead 7439-92-1
• ECLASS 6.0
  19060500
• ECLASS 11.0
  19060590
• Web-based management
  yes
• Altitude
  ≤ 2500 m (For restrictions, see the manufacturer's declaration for altitude operation)
• Net weight
  258.7 g
• Output name
  Digital output
• Identification
  ISA-S71.04-1985 G3 Harsh Group A
• Electrical isolation
  VCC // Ethernet // DSL (A/B) // FE
• Interface 1
  Ethernet interface, 10/100Base-T(X) in accordance with IEEE 802.3
• Protocols supported
  IPv4, IPv6, TCP/IP, HTTP, HTTPS
• Conductor cross section AWG max.
  16
• Management
  Web-based management: Diagnostics, log book, customized configuration
• Contact discharge
  ± 6 kV
• ECLASS 10.0.1
  19060590
• UNSPSC 6.01
  30211506
• Depth
  160 mm
• Housing material
  Aluminum / steel sheet DC01
Current output signal
≤ 500 mA (Short-circuit-proof)
Additional text
Please follow the special installation instructions in the documentation!
Degree of protection
IP20
Typical current consumption
80 mA (60 V DC)
Interface
Ethernet
Serial transmission speed
2-wire operation: 32 kbps ... 15.3 Mbps
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
2.5 mm²
Type of test
Shock in acc. with EN 60068-2-27/IEC 60068-2-27
Comments
Criterion B
ECLASS 5.0
19030100
ETIM 4.0
EC000740
UNSPSC 18.0
43222628
Width
60 mm
Permissible humidity (storage/transport)
10 % ... 95 % (non-condensing)
Frequency range
0.15 MHz ... 80 MHz
UNSPSC 12.01
39121008
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Nominal supply voltage
24 V DC ±5 %
Supply voltage range
10 V DC ... 60 V DC
No. of ports
1 (2-wire operation)
Conductor cross section AWG min.
24
Status and diagnostic indicators
LEDs for warning, status, and device information
Test result
15g
Signal
± 1 kV (asymmetrical, shielded Ethernet cable)
ECLASS 7.0
19060590
UNSPSC 11
39121008
Height
130 mm
Permissible humidity (operation)
10 % ... 95 % (non-condensing)
Designation
Corrosive gas test
MTTF
577 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
Auxiliary protocols
ARP, DHCP (Client), PING, SNMP
Interface 2
SHDSL interface according to ITU-T G.991.2.bis
Number of outputs
1
Voltage output signal
depending on the operating voltage
Standards/regulations
EN 50121-4
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
19030100
ECLASS 9.0
19060590
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Mounting type
DIN rail: 35 mm
Conductor cross section solid max.
1.5 mm²
UNSPSC 7.0901
39121008
UNSPSC 13.2
43222628
UNSPSC 19.0
43222628
Ambient temperature (operation)
-25 °C ... 60 °C
Connection method
Push-in spring connection
UNSPSC 20.0
43222628
UNSPSC 21.0
43222628
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Test voltage data interface/power supply
1.5 kV AC (50 Hz, 1 min.)
ETIM 7.0
EC000740
ETIM 6.0
EC000740
Transmission length
< 20 km (Depending on data rate and cable cross section)