2702106 Phoenix Contact Programmable Logic Controllers

Product Details

• Degree of protection
  IP20
• Connection method
  Push-in connection
• Conductor cross section AWG max.
  16
• Net weight
  210 g
• Supply voltage
  24 V DC
• Protection
  max. 8 A (polarity reversal protection up to 5 A)
• Depth
  54 mm
• Permissible humidity (operation)
  5 % ... 95 % (non-condensing)
• Ambient temperature (operation)
  -25 °C ... 60 °C
• Air pressure (operation)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
• Conductor cross section AWG min.
  24
• Conductor cross section solid min.
  0.2 mm²
• Note on weight specifications
  with connectors and bus base module
• Height
  129.9 mm
• Air pressure (storage/transport)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
• Conductor cross section flexible min.
  0.2 mm²
• Stripping length
  8 mm
• Note on dimensions
  The depth is valid when a TH 35-7,5 DIN rail is used (according to EN 60715).
• Permissible humidity (storage/transport)
  5 % ... 95 % (non-condensing)
• Designation
  Supply for digital input and output modules (UIO)
Note on the connection method
Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual.
Conductor cross section flexible max.
1.5 mm²
Width
35 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Conductor cross section solid max.
1.5 mm²
Mounting type
DIN rail
Mounting position
any (no temperature derating)
ECLASS 9.0
27242604
Number of inputs
16
Input filter time
3000 µs (Default)
Nominal load, inductive
max. 12 VA (1.2 H, 48 Ω, with nominal voltage)
Nominal load, ohmic
max. 12 W (48 Ω, with nominal voltage)
Nominal load, lamp
max. 12 W (at nominal voltage)
Output current when switched off
max. 300 µA
Reverse voltage resistance to short pulses
limited protection up to 0.5 A for 1 s
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
Protective circuit
Short-circuit protection, overload protection of the outputs electronic
Input name
Digital inputs
Input voltage range "1" signal
11 V DC ... 30 V DC
Nominal output voltage
24 V DC
Load min.
10 kΩ
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
ECLASS 11.0
27242604
ETIM 7.0
EC001599
Supply voltage range
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Nominal input current at UIN
2.4 mA
Behavior with inductive overload
Output can be destroyed
Behavior with overload
Shutdown with automatic restart
REACh SVHC
Lead 7439-92-1
ECLASS 6.0
27242600
UNSPSC 19.0
32151602
Transmission speed
100 Mbps
Connection technology
1-conductor
Output name
Digital outputs
Test section
5 V supply of the local bus (UBus) / 24 V supply (I/Os) 500 V AC 50 Hz 1 min.
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
ECLASS 5.1
27242600
UNSPSC 18.0
32151602
Color
traffic grey A RAL 7042
Number
2
Current consumption
max. 8 A (provide external protection)
Input voltage range "0" signal
-3 V DC ... 5 V DC
Number of outputs
16
Output voltage when switched off
max. 1 V
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 7.0
27242604
ETIM 6.0
EC001599
UNSPSC 21.0
32151602
Power consumption
max. 240 W (of which 1.25 W internal losses)
Description of the input
EN 61131-2 types 1 and 3
Nominal input voltage UIN
24 V DC
Output voltage
24 V DC
Switching frequency
max. 10000 per second (with at least 50 mA load current)
Interference emission
Noise emission test according to EN 61000-6-3 Class B
ECLASS 10.0.1
27242604
UNSPSC 13.2
32151602
UNSPSC 20.0
32151602
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m