2702094 Phoenix Contact Electrical Safety Devices

Product Details

• Depth
  114.5 mm
• Height
  112.2 mm
• Rated control circuit supply voltage US
  24 V DC -20 % / +25 %
• Filter time
  max. 3 ms (Test pulse width of low test pulses)
• Width
  12.5 mm
• Max. permissible relative humidity (operation)
  75 % (on average, 85% infrequently, non-condensing)
• Rated control supply current IS
  typ. 50 mA
• Protective circuit
  Surge protection Suppressor diode
• Input current range "0" signal
  0 mA ... 2 mA
• Limit frequency
  min. 0 Hz
• Mechanical service life
  10x 106 cycles
• Typical release time at US
  < 20 ms (when controlled via S12 (only for undelayed contact 13/14))
• Relay type
  Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
• Housing material
  PBT
• pluggable
  Yes
• Screw thread
  M3
• Safety Integrity Level Claim Limit (SIL CL)
  1 (up to SILCL 3 depending on the application)
• Standards/regulations
  DIN EN 50178
• ECLASS 10.0.1
  27371819
• ECLASS 4.0
  40020600
ECLASS 5.1
27371900
UNSPSC 19.0
39122205
Ambient temperature (operation)
-35 °C ... 60 °C (observe derating)
Max. permissible humidity (storage/transport)
75 % (on average, 85% infrequently, non-condensing)
Designation
Air clearances and creepage distances between the power circuits
Input name
Start circuit
Current consumption
< 3.2 mA (typically with US)
Concurrence
∞
Contact material
AgSnO2
Output fuse
6 A gL/gG (N/O contact)
Current
max. 100 mA
Nominal operating mode
100% operating factor
Degree of protection
IP20
Housing color
yellow
Stripping length
7 mm
Category
1 (up to Cat. 3 depending on the application)
Rated surge voltage/insulation
Basic insulation 4 kV: between all current paths and housingSafe isolation, reinforced insulation 6 kV:between (A1, A2, S11, S12, S21, S22, S34, M1) and enabling current path (13/14)between (A1, A2, S11, S12, S21, S22, S34, M1) and enabling current path (
Vibration (operation)
10 Hz ... 150 Hz, 2g
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 9.0
27371819
ETIM 7.0
EC001449
UNSPSC 20.0
39122205
Power consumption at US
typ. 1.2 W
Input voltage range "0" signal
0 V DC ... 5 V DC
Output name
Enabling current paths
Limiting continuous current
6 A (observe derating)
Maximum inrush current
500 mA (Δt = 1 ms at Us)
Restart time
< 1 s (Boot time)
Net weight
115.153 g
Assembly instructions
See derating curve
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Conductor cross-section AWG
24 ... 12
Rated insulation voltage
250 V AC
REACh SVHC
Lead 7439-92-1
ECLASS 4.1
40020600
ECLASS 6.0
27371800
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Maximum altitude
≤ 2000 m (Above sea level)
Inrush current
min. 3 mA
Number of inputs
1
Number of outputs
1
Switching capacity
min. 60 mW
Sq. Total current
72 A2 (observe derating)
Typical response time at US
< 35 ms (automatic start)
Mounting type
DIN rail mounting
Min. degree of protection of inst. location
IP54
Connection method
Screw connection
Stop category
1
Performance level (PL)
c (up to PL e depending on the application)
Overvoltage category
III
Shock
15g
Conformance
CE-compliant
ECLASS 5.0
27371900
ETIM 6.0
EC001449
UNSPSC 21.0
39122205
Description of the input
non-safety-related
Max. permissible overall conductor resistance
150 Ω
Output description
PNP
Contact type
2 enabling current paths
Switching voltage
min. 12 V AC/DC
Voltage
approx. 23 V DC (US - 1 V)
Short-circuit protection
Yes
Delay time range
0.2 s ... 60 s ±5 % (can be set for 27/28)
Mounting position
vertical or horizontal
Status display
5 x bi-color LED
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Safety Integrity Level (SIL)
1 (up to SIL 3 depending on the application)
Degree of pollution
2
ECLASS 11.0
27371819
ECLASS 7.0
27371819
UNSPSC 13.2
39121501
UNSPSC 18.0
39122205