2702068 Phoenix Contact Programmable Logic Controllers

Product Details

• Color
  traffic grey A RAL 7042
• Supply voltage
  230 V AC
• Output name
  Digital outputs
• Supply voltage range
  12 V AC ... 253 V AC (including all tolerances, including ripple, 50 ... 60 Hz)
• Nominal output voltage
  230 V AC
• Immunity to surge
  Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion A, AC and OUT supply lines: ±2 kV/±4 kV (symmetrical/asymmetrical)
• Developed according to standard
  IEC 61850-3 Immunity to magnetic fields, EN 61000-4-8/IEC 61000-4-8 300 A/m continuous, 1000 A/m for 1 s
• China RoHS
  Environmentally Friendly Use Period = 50 years
• UNSPSC 19.0
  32151602
• Conductor cross section AWG max.
  16
• Degree of protection
  IP20
• Conductor cross section flexible max.
  1.5 mm²
• Power consumption
  max. 2024 VA (of which 8 VA internal losses)
• Connection technology
  3-conductor
• Output voltage when switched off
  see diagram
• Immunity to EF
  Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, 20 V/m
• Interference emission
  Noise emission test according to EN 61000-6-3 Class B
• ECLASS 5.1
  27242600
• UNSPSC 13.2
  32151602
• Designation
  Supply for digital output modules (UO)
Conductor cross section solid min.
0.5 mm²
Conductor cross section AWG min.
20
Note on weight specifications
with connectors and bus base module
Protective circuit
External protection required I2t-value (a half-wave): 340 A2s
Number of outputs
4 (Triac outputs with zero voltage switch)
Load min.
5.1 kΩ (at 230 V)
Reverse voltage resistance to short pulses
Reverse voltage proof
ECLASS 6.0
27242600
ETIM 7.0
EC001599
ETIM 6.0
EC001599
UNSPSC 20.0
32151602
Connection method
Push-in connection
Conductor cross section solid max.
1.5 mm²
Stripping length
8 mm
Number
2
Height
126.1 mm
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Protection
max. 8 A
Output voltage
230 V AC
Nominal load, ohmic
max. 460 W (at nominal voltage)
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
Test section
I/Os / logic 4 kV Rated surge voltage (safe isolation according to EN 61010-2-201/IEC 61010-2-201)
ECLASS 11.0
27242604
ECLASS 7.0
27242604
UNSPSC 18.0
32151602
UNSPSC 21.0
32151602
Depth
54 mm
Permissible humidity (storage/transport)
5 % ... 95 % (non-condensing)
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Note on the connection method
Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual.When selecting the cables, please note that in the case of a small conductor cross section and high current, the terminal point te
Conductor cross section flexible min.
0.5 mm²
Mounting type
DIN rail
Current consumption
max. 8 A (provide external protection)
Switching frequency
max. 100 per second (with ohmic load)
Behavior with overload
Output may be damaged
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
ECLASS 10.0.1
27242604
Mounting position
any (observe temperature and current derating)
ECLASS 9.0
27242604
Air pressure (operation)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Transmission speed
100 Mbps
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Ambient temperature (operation)
-25 °C ... 60 °C (max. 2 A/channel for wall mounting on horizontal DIN rail; max. 1 A/channel for any mounting position)
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion A, 2.5 kV, criterion B, 4 kV
Width
53.6 mm
Note on dimensions
The depth is valid when a TH 35-7,5 DIN rail is used (according to EN 60715).
Net weight
239 g
REACh SVHC
Lead 7439-92-1
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V