2701550 Phoenix Contact Programmable Logic Controllers

Product Details

• Depth
  38 mm
• Air pressure (operation)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
• Permissible humidity (operation)
  5 % ... 95 %
• Net weight
  706.6 g
• Number of outputs
  16
• Width
  60 mm
• Drill hole spacing
  198.5 mm
• Ambient temperature (storage/transport)
  -25 °C ... 85 °C
• Housing material
  Zinc die-cast
• Connection method
  M12 connector, double occupancy
• Note on the connection method
  D-coded
• Height
  185 mm
• Permissible humidity (storage/transport)
  5 % ... 95 %
• Degree of protection
  IP65/IP67
• ECLASS 10.0.1
  27242604
• ECLASS 4.1
  27240400
• ECLASS 7.0
  27242604
• ECLASS 5.1
  27242600
• Number
  2
• Mounting type
  Wall mounting or DIN rail mounting; both with mounting plate.
Designation connection point
Copper cable
Device profile
FSP_IO
Specification
Sercos specification 1.1.2
Input name
Digital inputs
Note on dimensions
The height is 194.5 mm including the mounting plate. With fixing clips pulled out, the height is 212 mm. The depth is 38 mm including the mounting plate (30.5 mm without the mounting plate).
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Current consumption
typ. 3 mA ±15 % (at 24 V DC)
Number of inputs
16
Input filter time
< 1000 µs
Output voltage
24 V DC
Output voltage when switched off
max. 1 V
China RoHS
Environmentally Friendly Use Period = 25;
Ambient temperature (operation)
-25 °C ... 60 °C
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Designation
Actuators (UA) for additional devices
Transmission speed
100 Mbps (with auto negotiation)
System-specific protocols
Sercos protocols Sercos
Equipment type
Sercos slave
Supply voltage range
18 V DC ... 31.2 V DC (including all tolerances, including ripple)
Connection technology
3-conductor
Nominal input voltage UIN
24 V DC
Nominal input current at UIN
typ. 3 mA
Nominal load, inductive
12 VA (1.2 H, 48 Ω, with nominal voltage)
Output name
Digital outputs
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
27240400
ECLASS 5.0
27242200
ETIM 3.0
EC001599
UNSPSC 6.01
43172015
UNSPSC 19.0
32151602
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
ECLASS 11.0
27242604
UNSPSC 12.01
39121311
UNSPSC 20.0
32151602
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
ECLASS 6.0
27242600
ETIM 2.0
EC001433
ETIM 6.0
EC001599
UNSPSC 13.2
32151602
UNSPSC 21.0
32151602
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
ECLASS 9.0
27242604
UNSPSC 18.0
32151602
Input voltage range "1" signal
11 V DC ... 30 V DC
Reverse voltage resistance to short pulses
Reverse voltage proof
ETIM 7.0
EC001599
Switching frequency
max. 5500 per second (with at least 50 mA load current)
Test section
24 V supply (communications power/sensor supply, digital inputs/outputs)/bus connection (Ethernet 1) 500 V AC 50 Hz 1 min.
UNSPSC 7.0901
43201404
Number of positions
4
Description of the input
EN 61131-2 types 1 and 3
Protective circuit
Overload protection, short-circuit protection of outputs yes
Nominal output voltage
24 V DC (from voltage US)
Output current when switched off
max. 20 µA
Interference emission
Noise emission test as per EN 61000-6-4 Class A
ETIM 4.0
EC001599
Protocols supported
HTTP
Supply voltage
24 V DC
Nominal load, ohmic
12 W (48 Ω, with nominal voltage)
Behavior with overload
Auto restart
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
Input voltage range "0" signal
0 V ... 5 V DC
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
UNSPSC 11
39121311