2701549 Phoenix Contact Programmable Logic Controllers

Product Details

• Note on dimensions
  The height is 194.5 mm including the mounting plate. With fixing clips pulled out, the height is 212 mm. The depth is 38 mm including the mounting plate (30.5 mm without the mounting plate).
• Permissible humidity (operation)
  5 % ... 95 %
• Mounting type
  Wall mounting or DIN rail mounting; both with mounting plate.
• Connection method
  M12 connector, double occupancy
• Specification
  Sercos specification 1.1.2
• Supply voltage
  24 V DC
• Connection technology
  4-conductor
• Input voltage range "1" signal
  11 V DC ... 30 V DC
• Immunity to burst
  Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
• REACh SVHC
  Lead 7439-92-1
• ECLASS 5.0
  27242200
• ECLASS 9.0
  27242604
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Drill hole spacing
  198.5 mm
• Permissible humidity (storage/transport)
  5 % ... 95 %
• Degree of protection
  IP65/IP67
• Designation connection point
  Copper cable
• Equipment type
  Sercos slave
• Current consumption
  typ. 3 mA ±15 % (at 24 V DC)
• Nominal input voltage UIN
  24 V DC
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 11.0
27242604
ETIM 3.0
EC001599
ETIM 4.0
EC001599
UNSPSC 19.0
32151602
Width
60 mm
Ambient temperature (operation)
-25 °C ... 60 °C
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Designation
Actuators (UA) for additional devices
Device profile
FSP_IO
Number of positions
4
Supply voltage range
18 V DC ... 31.2 V DC (including all tolerances, including ripple)
Number of inputs
16
Input voltage range "0" signal
0 V ... 5 V DC
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
ECLASS 5.1
27242600
ECLASS 7.0
27242604
ETIM 2.0
EC001433
UNSPSC 12.01
39121311
UNSPSC 21.0
32151602
Height
185 mm
Ambient temperature (storage/transport)
-25 °C ... 85 °C
Housing material
Zinc die-cast
Number
2
Transmission speed
100 Mbps (with auto negotiation)
System-specific protocols
Sercos protocols Sercos
Protective circuit
Overload protection, short-circuit protection of sensor supply
Nominal input current at UIN
typ. 3 mA
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
Interference emission
Noise emission test as per EN 61000-6-4 Class A
ECLASS 10.0.1
27242604
ECLASS 4.1
27240400
ETIM 6.0
EC001599
UNSPSC 13.2
32151602
UNSPSC 7.0901
43201404
Depth
38 mm
Air pressure (operation)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Net weight
703 g
Note on the connection method
D-coded
Protocols supported
HTTP
Input name
Digital inputs
Description of the input
EN 61131-2 types 1 and 3
ECLASS 4.0
27240400
UNSPSC 6.01
43172015
UNSPSC 18.0
32151602
Input filter time
< 1000 µs
Test section
24 V supply (communications power and sensor supply, digital inputs)/bus connection (Ethernet 1) 500 V AC 50 Hz 1 min.
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
UNSPSC 11
39121311
UNSPSC 20.0
32151602
ECLASS 6.0
27242600
ETIM 7.0
EC001599