2701548 Phoenix Contact Programmable Logic Controllers

Product Details

• Output voltage when switched off
  max. 1 V
• Depth
  38 mm
• Ambient temperature (operation)
  -25 °C ... 60 °C
• Housing material
  Zinc die-cast
• Number
  2
• Note on the connection method
  D-coded
• System-specific protocols
  Sercos protocols Sercos
• Number of positions
  4
• Note on dimensions
  The height is 194.5 mm including the mounting plate. With fixing clips pulled out, the height is 212 mm. The depth is 38 mm including the mounting plate (30.5 mm without the mounting plate).
• Permissible humidity (storage/transport)
  5 % ... 95 %
• Permissible humidity (operation)
  5 % ... 95 %
• Connection method
  M12 connector, double occupancy
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Air pressure (operation)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
• Height
  185 mm
• Drill hole spacing
  198.5 mm
• Degree of protection
  IP65/IP67
• Net weight
  709.4 g
• Equipment type
  Sercos slave
• Specification
  Sercos specification 1.1.2
Input name
Digital inputs
Nominal input current at UIN
typ. 3 mA
Designation
Actuators (UA)
Current consumption
typ. 30 mA ±15 % (at 24 V DC)
Mounting type
Wall mounting or DIN rail mounting; both with mounting plate.
Device profile
FSP_IO
Input filter time
< 1000 µs
Protective circuit
Overload protection, short-circuit protection of outputs yes
Output name
Digital outputs
Nominal load, ohmic
12 W (48 Ω, with nominal voltage)
Test section
24 V supply (communications power and sensor supply, digital inputs)/bus connection (Ethernet 1) 500 V AC 50 Hz 1 min.
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
ECLASS 11.0
27242604
ECLASS 4.1
27240400
ECLASS 7.0
27242604
Ambient temperature (storage/transport)
-25 °C ... 85 °C
Transmission speed
100 Mbps (with auto negotiation)
Supply voltage
24 V DC
Description of the input
EN 61131-2 types 1 and 3
Input voltage range "1" signal
11 V DC ... 30 V DC
Nominal load, inductive
12 VA (1.2 H, 48 Ω, with nominal voltage)
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)
Width
60 mm
Designation connection point
Copper cable
Nominal input voltage UIN
24 V DC
Number of outputs
8
Nominal output voltage
24 V DC (from voltage UA)
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Protocols supported
HTTP
Supply voltage range
18 V DC ... 31.2 V DC (including all tolerances, including ripple)
Number of inputs
8
Connection technology
3-conductor
Output voltage
24 V DC
Switching frequency
max. 5500 per second (with at least 50 mA load current)
Input voltage range "0" signal
0 V ... 5 V DC
Reverse voltage resistance to short pulses
Reverse voltage proof
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
ECLASS 4.0
27240400
ECLASS 9.0
27242604
ETIM 4.0
EC001599
UNSPSC 11
39121311
UNSPSC 13.2
32151602
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
ECLASS 6.0
27242600
ECLASS 5.0
27242200
UNSPSC 6.01
43172015
ECLASS 5.1
27242600
ETIM 2.0
EC001433
ETIM 6.0
EC001599
Behavior with overload
Auto restart
ECLASS 10.0.1
27242604
REACh SVHC
Lead 7439-92-1
ETIM 3.0
EC001599
UNSPSC 7.0901
43201404
UNSPSC 19.0
32151602
China RoHS
Environmentally Friendly Use Period = 25;
UNSPSC 12.01
39121311
Output current when switched off
max. 20 µA
UNSPSC 20.0
32151602
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
UNSPSC 21.0
32151602
UNSPSC 18.0
32151602
Interference emission
Noise emission test as per EN 61000-6-4 Class A
ETIM 7.0
EC001599
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV