2701546 Phoenix Contact Programmable Logic Controllers

2701546 on Power Resource International
Phoenix Contact

Part#:2701546

Manufacturer:Phoenix Contact

Category:Programmable Logic Controllers

Product Lifecycle:Active

Get a quick Quote!

Axioline E, Digital I/O device, Sercos, M12 fast connection technology, Digital inputs: 8, 24 V DC, connection method: 4-conductor, Digital outputs: 4, 24 V DC, 2 A, connection method: 3-conductor, Plastic housing, degree of protection: IP65/IP67

About the manufacturer: Phoenix Contact is one of the manufacturers that offers Programmable Logic Controllers that you can order at Power Resources International site. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.

Check out the 2701546 Phoenix Contact price in the box on the right side or send a quick quote.

Product Details

  • Immunity to ESD
    Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
  • Width
    60 mm
  • Ambient temperature (storage/transport)
    -25 °C ... 85 °C
  • Air pressure (storage/transport)
    70 kPa ... 106 kPa (up to 3000 m above sea level)
  • Connection method
    M12 connector, (A-coded)
  • Number of positions
    4
  • Current consumption
    typ. 30 mA ±15 % (at 24 V DC)
  • Number of inputs
    8
  • Input voltage range "0" signal
    0 V ... 5 V DC
  • Output name
    Digital outputs
  • Switching frequency
    max. 5500 per second (with at least 50 mA load current)
  • Output current when switched off
    max. 20 µA
  • Note on dimensions
    The height is 212 mm including fixing clips.
  • Air pressure (operation)
    70 kPa ... 106 kPa (up to 3000 m above sea level)
  • Designation
    Actuators (UA)
  • Mounting type
    Wall mounting
  • Device profile
    FSP_IO
  • Supply voltage
    24 V DC
  • Input name
    Digital inputs
  • Nominal input voltage UIN
    24 V DC
  • Nominal load, inductive
    48 VA (1.2 H, 48 Ω, with nominal voltage)
  • Output voltage when switched off
    max. 1 V
  • Immunity to burst
    Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
  • Interference emission
    Noise emission test as per EN 61000-6-4 Class A
  • ECLASS 11.0
    27242604
  • ECLASS 7.0
    27242604
  • ETIM 2.0
    EC001433
  • UNSPSC 11
    39121311
  • UNSPSC 21.0
    32151602
  • Connection technology
    3-conductor
  • UNSPSC 12.01
    39121311
  • UNSPSC 20.0
    32151602
  • Utilization restriction
    EMC: class A product, see manufacturer's declaration in the download area
  • Drill hole spacing
    198.5 mm
  • Permissible humidity (storage/transport)
    5 % ... 95 %
  • Degree of protection
    IP65/IP67
  • Equipment type
    Sercos slave
  • Input filter time
    < 1000 µs
  • Input voltage range "1" signal
    11 V DC ... 30 V DC
  • Nominal load, ohmic
    48 W (48 Ω, with nominal voltage)
  • Reverse voltage resistance to short pulses
    Reverse voltage proof
  • Immunity to EF
    Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
  • REACh SVHC
    Lead 7439-92-1
  • ECLASS 4.1
    27240400
  • ETIM 4.0
    EC001599
  • Protocols supported
    HTTP
  • Supply voltage range
    18 V DC ... 31.2 V DC (including all tolerances, including ripple)
  • Nominal input current at UIN
    typ. 3 mA
  • Height
    185 mm
  • Ambient temperature (operation)
    -25 °C ... 60 °C
  • Color
    anthracite
  • Net weight
    551.2 g
  • Transmission speed
    100 Mbps (with auto negotiation)
  • Designation connection point
    Copper cable
  • System-specific protocols
    Sercos protocols Sercos
  • Output voltage
    24 V DC
  • Test section
    24 V supply (communications power and sensor supply, digital inputs)/bus connection (Ethernet 1) 500 V AC 50 Hz 1 min.
  • Immunity to surge
    Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)
  • ECLASS 10.0.1
    27242604
  • ECLASS 5.0
    27242200
  • ECLASS 9.0
    27242604
  • ETIM 6.0
    EC001599
  • UNSPSC 7.0901
    43201404
  • UNSPSC 19.0
    32151602
  • Protective circuit
    Overload protection, short-circuit protection of outputs yes
  • Number of outputs
    4
  • Nominal output voltage
    24 V DC (from voltage UA)
  • Behavior with overload
    Auto restart
  • Immunity to conducted interference
    Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
  • ETIM 3.0
    EC001599
  • UNSPSC 6.01
    43172015
  • UNSPSC 13.2
    32151602
  • Depth
    30.5 mm
  • Permissible humidity (operation)
    5 % ... 95 %
  • Housing material
    Pocan®
  • Number
    2
  • Note on the connection method
    D-coded
  • Specification
    Sercos specification 1.1.2
  • Description of the input
    EN 61131-2 types 1 and 3
  • Cable length
    max. 30 m (To the sensor)
  • Protection class
    III (IEC 61140, EN 61140, VDE 0140-1)
  • ECLASS 5.1
    27242600
  • UNSPSC 18.0
    32151602
  • Mechanical tests
    Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
  • ECLASS 4.0
    27240400
  • ETIM 7.0
    EC001599
  • China RoHS
    Environmentally Friendly Use Period = 25;
  • ECLASS 6.0
    27242600

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.


Manufacturer warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Fast Shipping & Delivery


Secure Payment Processing


Warranty


Responsive Customer Support


Need more details?

Feel free to chat with us

What can I help you find today?