2701540 Phoenix Contact Programmable Logic Controllers

Product Details

• Note on dimensions
  The height is 194.5 mm including the mounting plate. With fixing clips pulled out, the height is 212 mm. The depth is 38 mm including the mounting plate (30.5 mm without the mounting plate).
• Permissible humidity (storage/transport)
  5 % ... 95 %
• Number
  2
• Designation connection point
  Copper cable
• Protocols supported
  SNMP v1
• Input name
  Digital inputs
• Nominal input voltage UIN
  24 V DC
• ECLASS 4.1
  27240400
• Nominal input current at UIN
  typ. 3 mA
• Nominal output voltage
  24 V DC (from voltage UA)
• Output voltage when switched off
  max. 1 V
• Immunity to ESD
  Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Drill hole spacing
  198.5 mm
• Air pressure (storage/transport)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
• Designation
  Actuators (UA)
• Equipment type
  Modbus slave (server)
• Transmission speed
  10/100 Mbps (with auto negotiation)
• Description of the input
  EN 61131-2 types 1 and 3
• Number of inputs
  8
Number of outputs
4
Nominal load, ohmic
48 W (48 Ω, with nominal voltage)
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)
Reverse voltage resistance to short pulses
Reverse voltage proof
ECLASS 10.0.1
27242604
ECLASS 6.0
27242600
Depth
38 mm
Ambient temperature (storage/transport)
-25 °C ... 85 °C
Mounting type
Wall mounting or DIN rail mounting; both with mounting plate.
Connection method
M12 connector, (A-coded)
Current consumption
typ. 30 mA ±15 % (at 24 V DC)
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
Supply voltage range
18 V DC ... 31.2 V DC (including all tolerances, including ripple)
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
Input voltage range "1" signal
11 V DC ... 30 V DC
Output current when switched off
max. 20 µA
Height
185 mm
Ambient temperature (operation)
-25 °C ... 60 °C
Degree of protection
IP65/IP67
Note on the connection method
D-coded
Supply voltage
24 V DC
Protective circuit
Overload protection, short-circuit protection of outputs yes
Input voltage range "0" signal
0 V ... 5 V DC
Output voltage
24 V DC
Test section
24 V supply (communications power and sensor supply, digital inputs)/bus connection (Ethernet 1) 500 V AC 50 Hz 1 min.
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
Width
60 mm
Permissible humidity (operation)
5 % ... 95 %
Housing material
Zinc die-cast
Net weight
719.2 g
Specification
Modbus application protocol V1.1b
System-specific protocols
Modbus protocols Modbus/TCP
Cable length
max. 30 m (To the sensor)
Output name
Digital outputs
ETIM 3.0
EC001599
Input filter time
< 1000 µs
Connection technology
3-conductor
ETIM 2.0
EC001433
ETIM 7.0
EC001599
ETIM 4.0
EC001599
UNSPSC 18.0
32151602
UNSPSC 20.0
32151602
Air pressure (operation)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Number of positions
4
UNSPSC 7.0901
43201404
Nominal load, inductive
48 VA (1.2 H, 48 Ω, with nominal voltage)
ECLASS 11.0
27242604
UNSPSC 11
39121311
UNSPSC 21.0
32151602
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 9.0
27242604
UNSPSC 13.2
32151602
Switching frequency
max. 5500 per second (with at least 50 mA load current)
ECLASS 5.1
27242600
UNSPSC 19.0
32151602
Behavior with overload
Auto restart
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
ECLASS 4.0
27240400
UNSPSC 6.01
43172015
Interference emission
Noise emission test as per EN 61000-6-4 Class A
ECLASS 7.0
27242604
ETIM 6.0
EC001599
REACh SVHC
Lead 7439-92-1
ECLASS 5.0
27242200
UNSPSC 12.01
39121311
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m