2701539 Phoenix Contact Programmable Logic Controllers

Product Details

• Drill hole spacing
  198.5 mm
• Note on dimensions
  The height is 194.5 mm including the mounting plate. With fixing clips pulled out, the height is 212 mm. The depth is 38 mm including the mounting plate (30.5 mm without the mounting plate).
• Permissible humidity (operation)
  5 % ... 95 %
• Permissible humidity (storage/transport)
  5 % ... 95 %
• Mounting type
  Wall mounting or DIN rail mounting; both with mounting plate.
• Protocols supported
  SNMP v1
• Supply voltage range
  18 V DC ... 31.2 V DC (including all tolerances, including ripple)
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Depth
  38 mm
• Air pressure (operation)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
• Number
  2
• Transmission speed
  10/100 Mbps (with auto negotiation)
• Specification
  Modbus application protocol V1.1b
• Description of the input
  EN 61131-2 types 1 and 3
• Input voltage range "0" signal
  0 V ... 5 V DC
• Nominal input current at UIN
  typ. 3 mA
• Switching frequency
  max. 5500 per second (with at least 50 mA load current)
• Immunity to EF
  Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
• REACh SVHC
  Lead 7439-92-1
• ECLASS 4.1
  27240400
Width
60 mm
Ambient temperature (storage/transport)
-25 °C ... 85 °C
Housing material
Zinc die-cast
Number of positions
4
Note on the connection method
D-coded
Height
185 mm
Ambient temperature (operation)
-25 °C ... 60 °C
Degree of protection
IP65/IP67
Designation
Actuators (UA) for additional devices
Connection method
M12 connector, double occupancy
System-specific protocols
Modbus protocols Modbus/TCP
Connection technology
3-conductor
Input filter time
< 1000 µs
Output voltage
24 V DC
Output voltage when switched off
max. 1 V
Test section
24 V supply (communications power/sensor supply, digital inputs/outputs)/bus connection (Ethernet 1) 500 V AC 50 Hz 1 min.
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Net weight
727.7 g
Designation connection point
Copper cable
Supply voltage
24 V DC
Number of inputs
16
Protective circuit
Overload protection, short-circuit protection of outputs yes
Input voltage range "1" signal
11 V DC ... 30 V DC
Nominal output voltage
24 V DC (from voltage US)
Reverse voltage resistance to short pulses
Reverse voltage proof
ECLASS 5.1
27242600
ETIM 2.0
EC001433
UNSPSC 11
39121311
UNSPSC 19.0
32151602
Nominal input voltage UIN
24 V DC
Output name
Digital outputs
Nominal load, ohmic
12 W (48 Ω, with nominal voltage)
Nominal load, inductive
12 VA (1.2 H, 48 Ω, with nominal voltage)
Behavior with overload
Auto restart
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 4.0
27240400
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
ECLASS 10.0.1
27242604
ECLASS 7.0
27242604
ETIM 3.0
EC001599
UNSPSC 12.01
39121311
UNSPSC 18.0
32151602
Current consumption
typ. 3 mA ±15 % (at 24 V DC)
Cable length
max. 30 m (To the sensor)
Number of outputs
16
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
ECLASS 11.0
27242604
ETIM 4.0
EC001599
UNSPSC 6.01
43172015
ETIM 6.0
EC001599
UNSPSC 21.0
32151602
ECLASS 6.0
27242600
UNSPSC 7.0901
43201404
UNSPSC 13.2
32151602
ECLASS 5.0
27242200
ECLASS 9.0
27242604
UNSPSC 20.0
32151602
Input name
Digital inputs
Output current when switched off
max. 20 µA
ETIM 7.0
EC001599
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
Equipment type
Modbus slave (server)
Interference emission
Noise emission test as per EN 61000-6-4 Class A