2701534 Phoenix Contact Programmable Logic Controllers

Product Details

• Width
  60 mm
• Note on dimensions
  The height is 212 mm including fixing clips.
• Air pressure (operation)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
• Mounting type
  Wall mounting
• ECLASS 4.0
  27240400
• Permissible humidity (storage/transport)
  5 % ... 95 %
• Housing material
  Pocan®
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Net weight
  558.4 g
• Designation connection point
  Copper cable
• Transmission speed
  10/100 Mbps (with auto negotiation)
• Description of the input
  EN 61131-2 types 1 and 3
• Nominal input voltage UIN
  24 V DC
• Nominal input current at UIN
  typ. 3 mA
• Switching frequency
  max. 5500 per second (with at least 50 mA load current)
• ECLASS 6.0
  27242600
• Color
  anthracite
• Number of positions
  4
• Supply voltage
  24 V DC
• Connection technology
  3-conductor
Input voltage range "0" signal
0 V ... 5 V DC
Output voltage
24 V DC
Nominal output voltage
24 V DC (from voltage US)
Output voltage when switched off
max. 1 V
ECLASS 11.0
27242604
Drill hole spacing
198.5 mm
Degree of protection
IP65/IP67
Height
185 mm
Permissible humidity (operation)
5 % ... 95 %
Ambient temperature (storage/transport)
-25 °C ... 85 °C
Designation
Actuators (UA) for additional devices
Number
2
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 5.0
27242200
Depth
30.5 mm
Ambient temperature (operation)
-25 °C ... 60 °C
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Note on the connection method
D-coded
System-specific protocols
Modbus protocols Modbus/TCP
Supply voltage range
18 V DC ... 31.2 V DC (including all tolerances, including ripple)
ECLASS 5.1
27242600
Specification
Modbus application protocol V1.1b
Number of inputs
16
Input filter time
< 1000 µs
Number of outputs
16
Nominal load, inductive
12 VA (1.2 H, 48 Ω, with nominal voltage)
ECLASS 4.1
27240400
Connection method
M12 connector, double occupancy
Equipment type
Modbus slave (server)
Input voltage range "1" signal
11 V DC ... 30 V DC
Current consumption
typ. 3 mA ±15 % (at 24 V DC)
Test section
24 V supply (communications power/sensor supply, digital inputs/outputs)/bus connection (Ethernet 1) 500 V AC 50 Hz 1 min.
REACh SVHC
Lead 7439-92-1
Cable length
max. 30 m (To the sensor)
Output current when switched off
max. 20 µA
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
ECLASS 7.0
27242604
ETIM 4.0
EC001599
UNSPSC 13.2
32151602
UNSPSC 18.0
32151602
Protective circuit
Overload protection, short-circuit protection of outputs yes
Behavior with overload
Auto restart
UNSPSC 11
39121311
UNSPSC 19.0
32151602
Nominal load, ohmic
12 W (48 Ω, with nominal voltage)
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
ETIM 3.0
EC001599
UNSPSC 12.01
39121311
ECLASS 10.0.1
27242604
Reverse voltage resistance to short pulses
Reverse voltage proof
UNSPSC 6.01
43172015
ETIM 2.0
EC001433
ETIM 7.0
EC001599
UNSPSC 20.0
32151602
Input name
Digital inputs
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
Protocols supported
SNMP v1
ECLASS 9.0
27242604
UNSPSC 21.0
32151602
Interference emission
Noise emission test as per EN 61000-6-4 Class A
ETIM 6.0
EC001599
Output name
Digital outputs
UNSPSC 7.0901
43201404
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g