2701528 Phoenix Contact Programmable Logic Controllers

Product Details

• Permissible humidity (storage/transport)
  5 % ... 95 %
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Drill hole spacing
  198.5 mm
• Reverse voltage resistance to short pulses
  Reverse voltage proof
• ETIM 3.0
  EC001599
• UNSPSC 13.2
  32151602
• Width
  60 mm
• Ambient temperature (storage/transport)
  -25 °C ... 85 °C
• Air pressure (storage/transport)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
• Net weight
  715.5 g
• Transmission speed
  100 Mbps (with auto negotiation)
• Specification
  ETG.1000 V1.02
• Description of the input
  EN 61131-2 types 1 and 3
• Nominal input current at UIN
  typ. 3 mA
• Number of outputs
  16
• Output voltage
  24 V DC
• Nominal output voltage
  24 V DC (from voltage US)
• Output name
  Digital outputs
• Depth
  38 mm
• Air pressure (operation)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
Nominal load, ohmic
12 W (48 Ω, with nominal voltage)
Output current when switched off
max. 20 µA
ETIM 2.0
EC001433
Degree of protection
IP65/IP67
Note on the connection method
D-coded
Equipment type
EtherCAT® slave
Supply voltage
24 V DC
Connection technology
3-conductor
Nominal input voltage UIN
24 V DC
ETIM 7.0
EC001599
UNSPSC 12.01
39121311
UNSPSC 21.0
32151602
UNSPSC 7.0901
43201404
UNSPSC 19.0
32151602
Note on dimensions
The height is 194.5 mm including the mounting plate. With fixing clips pulled out, the height is 212 mm. The depth is 38 mm including the mounting plate (30.5 mm without the mounting plate).
Permissible humidity (operation)
5 % ... 95 %
Housing material
Zinc die-cast
Designation connection point
Copper cable
System-specific protocols
Mailbox protocols CANopen® over EtherCAT®
Input name
Digital inputs
Input voltage range "1" signal
11 V DC ... 30 V DC
Switching frequency
max. 5500 per second (with at least 50 mA load current)
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
ECLASS 9.0
27242604
ETIM 6.0
EC001599
Output voltage when switched off
max. 1 V
ECLASS 4.1
27240400
ETIM 4.0
EC001599
Height
185 mm
Ambient temperature (operation)
-25 °C ... 60 °C
Designation
Actuators (UA) for additional devices
Number of positions
4
UNSPSC 6.01
43172015
UNSPSC 20.0
32151602
Current consumption
typ. 3 mA ±15 % (at 24 V DC)
Input filter time
< 1000 µs
Input voltage range "0" signal
0 V ... 5 V DC
Mounting type
Wall mounting or DIN rail mounting; both with mounting plate.
Number
2
Connection method
M12 connector, double occupancy
Type of addressing
Auto-increment addressing
Supply voltage range
18 V DC ... 31.2 V DC (including all tolerances, including ripple)
Number of inputs
16
Protective circuit
Overload protection, short-circuit protection of outputs yes
Cable length
max. 30 m (To the sensor)
UNSPSC 11
39121311
UNSPSC 18.0
32151602
Interference emission
Noise emission test as per EN 61000-6-4 Class A
Behavior with overload
Auto restart
ECLASS 11.0
27242604
ECLASS 7.0
27242604
REACh SVHC
Lead 7439-92-1
ECLASS 6.0
27242600
ECLASS 4.0
27240400
China RoHS
Environmentally Friendly Use Period = 25;
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
ECLASS 5.0
27242200
ECLASS 5.1
27242600
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
Nominal load, inductive
12 VA (1.2 H, 48 Ω, with nominal voltage)
Test section
24 V supply (communications power/sensor supply, digital inputs/outputs)/bus connection (Ethernet 1) 500 V AC 50 Hz 1 min.
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)
ECLASS 10.0.1
27242604