2701526 Phoenix Contact Programmable Logic Controllers

Product Details

• Depth
  38 mm
• Ambient temperature (storage/transport)
  -25 °C ... 85 °C
• Housing material
  Zinc die-cast
• Mounting type
  Wall mounting or DIN rail mounting; both with mounting plate.
• System-specific protocols
  Mailbox protocols CANopen® over EtherCAT®
• Supply voltage range
  18 V DC ... 31.2 V DC (including all tolerances, including ripple)
• Input name
  Digital inputs
• China RoHS
  Environmentally Friendly Use Period = 25;
• ECLASS 9.0
  27242604
• ETIM 4.0
  EC001599
• Height
  185 mm
• Ambient temperature (operation)
  -25 °C ... 60 °C
• Permissible humidity (operation)
  5 % ... 95 %
• Degree of protection
  IP65/IP67
• Designation connection point
  Copper cable
• Supply voltage
  24 V DC
• Protective circuit
  Overload protection, short-circuit protection of sensor supply
• Input voltage range "1" signal
  11 V DC ... 30 V DC
• Immunity to surge
  Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)
• Interference emission
  Noise emission test as per EN 61000-6-4 Class A
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
ECLASS 4.0
27240400
ETIM 2.0
EC001433
UNSPSC 12.01
39121311
UNSPSC 18.0
32151602
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Drill hole spacing
198.5 mm
Air pressure (operation)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Note on the connection method
D-coded
Designation
Actuators (UA) for additional devices
Equipment type
EtherCAT® slave
Input voltage range "0" signal
0 V ... 5 V DC
ECLASS 6.0
27242600
ECLASS 5.0
27242200
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
UNSPSC 20.0
32151602
Width
60 mm
Permissible humidity (storage/transport)
5 % ... 95 %
Number
2
Connection method
M12 connector, double occupancy
Specification
ETG.1000 V1.02
Nominal input current at UIN
typ. 3 A
Test section
24 V supply (communications power and sensor supply, digital inputs)/bus connection (Ethernet 1) 500 V AC 50 Hz 1 min.
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
REACh SVHC
Lead 7439-92-1
ETIM 6.0
EC001599
UNSPSC 11
39121311
ECLASS 10.0.1
27242604
ECLASS 5.1
27242600
ECLASS 11.0
27242604
ETIM 7.0
EC001599
Note on dimensions
The height is 194.5 mm including the mounting plate. With fixing clips pulled out, the height is 212 mm. The depth is 38 mm including the mounting plate (30.5 mm without the mounting plate).
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Net weight
718.8 g
Transmission speed
100 Mbps (with auto negotiation)
Number of positions
4
Connection technology
4-conductor
Nominal input voltage UIN
24 V DC
Input filter time
< 1000 µs
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
ETIM 3.0
EC001599
UNSPSC 19.0
32151602
Current consumption
typ. 3 mA ±15 % (at 24 V DC)
Type of addressing
Auto-increment addressing
Description of the input
EN 61131-2 types 1 and 3
Number of inputs
16
ECLASS 7.0
27242604
UNSPSC 7.0901
43201404
UNSPSC 13.2
32151602
UNSPSC 21.0
32151602
UNSPSC 6.01
43172015
ECLASS 4.1
27240400