2701525 Phoenix Contact Programmable Logic Controllers

Product Details

• ECLASS 7.0
  27242604
• ETIM 4.0
  EC001599
• ECLASS 4.0
  27240400
• UNSPSC 7.0901
  43201404
• UNSPSC 19.0
  32151602
• Depth
  38 mm
• Ambient temperature (operation)
  -25 °C ... 60 °C
• Net weight
  722.8 g
• Note on the connection method
  D-coded
• Type of addressing
  Auto-increment addressing
• Current consumption
  typ. 30 mA ±15 % (at 24 V DC)
• Protective circuit
  Overload protection, short-circuit protection of outputs yes
• Nominal input voltage UIN
  24 V DC
• Interference emission
  Noise emission test as per EN 61000-6-4 Class A
• Output name
  Digital outputs
• ECLASS 10.0.1
  27242604
• UNSPSC 12.01
  39121311
• UNSPSC 20.0
  32151602
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Drill hole spacing
  198.5 mm
Ambient temperature (storage/transport)
-25 °C ... 85 °C
Air pressure (operation)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Connection method
M12 connector, double occupancy
Designation connection point
Copper cable
Input name
Digital inputs
Connection technology
3-conductor
Input voltage range "1" signal
11 V DC ... 30 V DC
Width
60 mm
Degree of protection
IP65/IP67
Number
2
System-specific protocols
Mailbox protocols CANopen® over EtherCAT®
Equipment type
EtherCAT® slave
Number of inputs
8
Nominal input current at UIN
typ. 3 mA
Nominal output voltage
24 V DC (from voltage UA)
Output voltage when switched off
max. 1 V
REACh SVHC
Lead 7439-92-1
ECLASS 11.0
27242604
UNSPSC 11
39121311
UNSPSC 13.2
32151602
Input filter time
< 1000 µs
Number of outputs
8
Output current when switched off
max. 20 µA
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
China RoHS
Environmentally Friendly Use Period = 25;
Height
185 mm
Permissible humidity (operation)
5 % ... 95 %
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Mounting type
Wall mounting or DIN rail mounting; both with mounting plate.
Number of positions
4
Supply voltage
24 V DC
Supply voltage range
18 V DC ... 31.2 V DC (including all tolerances, including ripple)
ETIM 2.0
EC001433
ETIM 6.0
EC001599
ETIM 7.0
EC001599
UNSPSC 21.0
32151602
Designation
Actuators (UA)
Transmission speed
100 Mbps (with auto negotiation)
Specification
ETG.1000 V1.02
Description of the input
EN 61131-2 types 1 and 3
Input voltage range "0" signal
0 V ... 5 V DC
Output voltage
24 V DC
ETIM 3.0
EC001599
UNSPSC 6.01
43172015
UNSPSC 18.0
32151602
Note on dimensions
The height is 194.5 mm including the mounting plate. With fixing clips pulled out, the height is 212 mm. The depth is 38 mm including the mounting plate (30.5 mm without the mounting plate).
Permissible humidity (storage/transport)
5 % ... 95 %
Housing material
Zinc die-cast
ECLASS 4.1
27240400
Behavior with overload
Auto restart
Reverse voltage resistance to short pulses
Reverse voltage proof
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
ECLASS 5.0
27242200
Nominal load, inductive
12 VA (1.2 H, 48 Ω, with nominal voltage)
ECLASS 9.0
27242604
Test section
24 V supply (communications power and sensor supply, digital inputs)/bus connection (Ethernet 1) 500 V AC 50 Hz 1 min.
ECLASS 6.0
27242600
Nominal load, ohmic
12 W (48 Ω, with nominal voltage)
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)
Switching frequency
max. 5500 per second (with at least 50 mA load current)
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
ECLASS 5.1
27242600
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V