2701524 Phoenix Contact Programmable Logic Controllers

Product Details

• Designation
  Actuators (UA)
• Height
  185 mm
• Permissible humidity (operation)
  5 % ... 95 %
• Degree of protection
  IP65/IP67
• Note on dimensions
  The height is 212 mm including fixing clips.
• Nominal output voltage
  24 V DC
• Output voltage when switched off
  max. 1 V
• Ambient temperature (storage/transport)
  -25 °C ... 85 °C
• Color
  anthracite
• Note on the connection method
  D-coded
• Equipment type
  EtherCAT® slave
• Supply voltage range
  18 V DC ... 31.2 V DC (including all tolerances, including ripple)
• Nominal input voltage UIN
  24 V DC
• Nominal input current at UIN
  typ. 3 mA
• Type of protection
  Overload protection
• Test section
  24 V supply (communications power and sensor supply, IO-Link ports)/bus connection (Ethernet 1) 500 V AC 50 Hz 1 min.
• ECLASS 4.1
  27240400
• Depth
  30.5 mm
• Input name
  Digital inputs at pin 2 for type A ports
• Number of inputs
  max. 8 (EN 61131-2 type 1)
Input filter time
< 1000 µs
Number of outputs
max. 8
ECLASS 11.0
27242604
Connection technology
3-conductor
Input voltage range "1" signal
15 V DC ... 30 V DC
Nominal input current
typ. 3 mA
Output description
IO-Link ports in digital output (DO) mode
Switching rate
1 per second, maximum (at nominal inductive load)
Behavior with overload
Shutdown with automatic restart
ECLASS 4.0
27240400
ETIM 2.0
EC001433
UNSPSC 6.01
43172015
UNSPSC 12.01
39121311
System-specific protocols
Mailbox protocols CANopen® over EtherCAT®
Current consumption
typ. 28 mA ±15 % (at 24 V DC)
Input voltage range "0" signal
-0.3 V DC ... 5 V DC
Sensor current per channel
max. 200 mA (from L+/L-)
Nominal load, ohmic
3.6 W (160 Ω, at nominal load)
Signal delay
max. 150 µs (when switched on)
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)
Total sensor current
max. 1.6 A (from L+/L-)
Maximum output current per device
1.2 A
Limitation of the voltage induced on circuit interruption
-15 V DC
ECLASS 10.0.1
27242604
ECLASS 6.0
27242600
ETIM 7.0
EC001599
UNSPSC 20.0
32151602
Description of the input
IO-Link ports in digital input (DI) mode
Input frequency
0.5 kHz
Net weight
551.4 g
Number of positions
4
Supply voltage
24 V DC
Ambient temperature (operation)
-25 °C ... 60 °C
Housing material
Pocan®
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
Permissible humidity (storage/transport)
5 % ... 95 %
Number
2
Transmission speed
100 Mbps (with auto negotiation)
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
Width
60 mm
Type of addressing
Auto-increment addressing
ECLASS 5.1
27242600
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
Air pressure (operation)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Designation connection point
Copper cable
Drill hole spacing
198.5 mm
Specification
ETG.1000 V1.02
Connection method
M12 connector, X01 ... X04 have double occupancy
Protective circuit
Overload protection, short-circuit protection of sensor supply
Nominal load, inductive
3.6 VA (0.8 H, 160 Ω, at nominal load)
Interference emission
Noise emission test as per EN 61000-6-4 Class A
Mounting type
Wall mounting
Output current when switched off
max. 300 µA
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
China RoHS
Environmentally Friendly Use Period = 25;
ETIM 3.0
EC001599
ECLASS 5.0
27242200
ECLASS 9.0
27242604
Maximum output current per channel
150 mA
UNSPSC 7.0901
43201404
ECLASS 7.0
27242604
UNSPSC 18.0
32151602
UNSPSC 19.0
32151602
ETIM 4.0
EC001599
UNSPSC 11
39121311
UNSPSC 13.2
32151602
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
ETIM 6.0
EC001599
UNSPSC 21.0
32151602