2701523 Phoenix Contact Programmable Logic Controllers
Part#:2701523
Manufacturer:Phoenix Contact
Category:Programmable Logic Controllers
Product Lifecycle:Active
Get a quick Quote!
Axioline E, Digital I/O device, EtherCAT®, M12 fast connection technology, Digital inputs: 8, 24 V DC, connection method: 4-conductor, Digital outputs: 4, 24 V DC, 2 A, connection method: 3-conductor, Plastic housing, degree of protection: IP65/IP67
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Programmable Logic Controllers that you can order at Power Resources International site. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2701523 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Drill hole spacing 198.5 mm
- Housing material Pocan®
- Net weight 550 g
- Transmission speed 100 Mbps (with auto negotiation)
- Supply voltage range 18 V DC ... 31.2 V DC (including all tolerances, including ripple)
- Nominal input voltage UIN 24 V DC
- Number of outputs 4
- Output voltage when switched off max. 1 V
- Immunity to EF Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
- Input filter time < 1000 µs
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Note on dimensions The height is 212 mm including fixing clips.
- Degree of protection IP65/IP67
- Number 2
- Connection method M12 connector, (A-coded)
- Type of addressing Auto-increment addressing
- System-specific protocols Mailbox protocols CANopen® over EtherCAT®
- Description of the input EN 61131-2 types 1 and 3
- Input name Digital inputs
- Height 185 mm
- Ambient temperature (operation) -25 °C ... 60 °C
- Ambient temperature (storage/transport) -25 °C ... 85 °C
- Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level)
- Note on the connection method D-coded
- Specification ETG.1000 V1.02
- Number of inputs 8
- Input voltage range "1" signal 11 V DC ... 30 V DC
- Nominal load, ohmic 48 W (48 Ω, with nominal voltage)
- Nominal load, inductive 48 VA (1.2 H, 48 Ω, with nominal voltage)
- Immunity to burst Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
- Depth 30.5 mm
- Permissible humidity (storage/transport) 5 % ... 95 %
- Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level)
- Mounting type Wall mounting
- Designation Actuators (UA)
- Equipment type EtherCAT® slave
- Supply voltage 24 V DC
- Current consumption typ. 30 mA ±15 % (at 24 V DC)
- Input voltage range "0" signal 0 V ... 5 V DC
- Output name Digital outputs
- Output current when switched off max. 20 µA
- Width 60 mm
- Permissible humidity (operation) 5 % ... 95 %
- Color anthracite
- Designation connection point Copper cable
- Number of positions 4
- Connection technology 3-conductor
- Protective circuit Overload protection, short-circuit protection of outputs yes
- Nominal input current at UIN typ. 3 mA
- Nominal output voltage 24 V DC (from voltage UA)
- Behavior with overload Auto restart
- UNSPSC 19.0 32151602
- China RoHS Environmentally Friendly Use Period = 25;
- ECLASS 7.0 27242604
- ETIM 3.0 EC001599
- UNSPSC 13.2 32151602
- Interference emission Noise emission test as per EN 61000-6-4 Class A
- ECLASS 11.0 27242604
- ECLASS 10.0.1 27242604
- ETIM 6.0 EC001599
- UNSPSC 6.01 43172015
- UNSPSC 21.0 32151602
- Output voltage 24 V DC
- ECLASS 5.0 27242200
- ETIM 2.0 EC001433
- ETIM 4.0 EC001599
- UNSPSC 12.01 39121311
- Cable length max. 30 m (To the sensor)
- Reverse voltage resistance to short pulses Reverse voltage proof
- Protection class III (IEC 61140, EN 61140, VDE 0140-1)
- Switching frequency max. 5500 per second (with at least 50 mA load current)
- ECLASS 6.0 27242600
- REACh SVHC Lead 7439-92-1
- ECLASS 4.0 27240400
- Immunity to surge Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)
- Immunity to ESD Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
- Mechanical tests Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
- Test section 24 V supply (communications power and sensor supply, digital inputs)/bus connection (Ethernet 1) 500 V AC 50 Hz 1 min.
- Immunity to conducted interference Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
- UNSPSC 11 39121311
- UNSPSC 20.0 32151602
- ECLASS 5.1 27242600
- UNSPSC 7.0901 43201404
- UNSPSC 18.0 32151602
- ETIM 7.0 EC001599
- ECLASS 4.1 27240400
- ECLASS 9.0 27242604
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
Manufacturer warranty
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
Fast Shipping & Delivery
Secure Payment Processing
Warranty
Responsive Customer Support
Need more details?
Feel free to chat with us
What can I help you find today?