2701522 Phoenix Contact Programmable Logic Controllers

Product Details

• Air pressure (storage/transport)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
• Supply voltage
  24 V DC
• Ambient temperature (operation)
  -25 °C ... 60 °C
• Supply voltage range
  18 V DC ... 31.2 V DC (including all tolerances, including ripple)
• ECLASS 11.0
  27242604
• Width
  60 mm
• Height
  185 mm
• Drill hole spacing
  198.5 mm
• Ambient temperature (storage/transport)
  -25 °C ... 85 °C
• Type of addressing
  Auto-increment addressing
• Description of the input
  EN 61131-2 types 1 and 3
• Input filter time
  < 1000 µs
• Air pressure (operation)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
• Number of positions
  4
• Designation connection point
  Copper cable
• Specification
  ETG.1000 V1.02
• Permissible humidity (storage/transport)
  5 % ... 95 %
• Housing material
  Pocan®
• Net weight
  541.3 g
• System-specific protocols
  Mailbox protocols CANopen® over EtherCAT®
Connection technology
3-conductor
Cable length
max. 30 m (To the sensor)
Output name
Digital outputs
Behavior with overload
Auto restart
Interference emission
Noise emission test as per EN 61000-6-4 Class A
Nominal output voltage
24 V DC (from voltage US)
ECLASS 4.0
27240400
ECLASS 7.0
27242604
UNSPSC 6.01
43172015
Output current when switched off
max. 20 µA
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
UNSPSC 18.0
32151602
ECLASS 5.0
27242200
ETIM 3.0
EC001599
UNSPSC 13.2
32151602
UNSPSC 21.0
32151602
Depth
30.5 mm
Degree of protection
IP65/IP67
Designation
Actuators (UA) for additional devices
Test section
24 V supply (communications power/sensor supply, digital inputs/outputs)/bus connection (Ethernet 1) 500 V AC 50 Hz 1 min.
Transmission speed
100 Mbps (with auto negotiation)
Color
anthracite
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Note on dimensions
The height is 212 mm including fixing clips.
Note on the connection method
D-coded
Connection method
M12 connector, double occupancy
Output voltage
24 V DC
UNSPSC 19.0
32151602
Number of outputs
16
China RoHS
Environmentally Friendly Use Period = 25;
ETIM 6.0
EC001599
Nominal load, inductive
12 VA (1.2 H, 48 Ω, with nominal voltage)
REACh SVHC
Lead 7439-92-1
ECLASS 4.1
27240400
ETIM 7.0
EC001599
Reverse voltage resistance to short pulses
Reverse voltage proof
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)
Current consumption
typ. 3 mA ±15 % (at 24 V DC)
Nominal input current at UIN
typ. 3 mA
Number of inputs
16
Nominal load, ohmic
12 W (48 Ω, with nominal voltage)
Nominal input voltage UIN
24 V DC
Switching frequency
max. 5500 per second (with at least 50 mA load current)
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
ECLASS 6.0
27242600
Permissible humidity (operation)
5 % ... 95 %
Mounting type
Wall mounting
Protective circuit
Overload protection, short-circuit protection of outputs yes
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
UNSPSC 7.0901
43201404
UNSPSC 20.0
32151602
Number
2
Input name
Digital inputs
Input voltage range "1" signal
11 V DC ... 30 V DC
Output voltage when switched off
max. 1 V
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
ECLASS 5.1
27242600
UNSPSC 12.01
39121311
Equipment type
EtherCAT® slave
Input voltage range "0" signal
0 V ... 5 V DC
ECLASS 10.0.1
27242604
ETIM 2.0
EC001433
ETIM 4.0
EC001599
UNSPSC 11
39121311
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
ECLASS 9.0
27242604
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m