2701520 Phoenix Contact Programmable Logic Controllers

Product Details

• Depth
  30.5 mm
• Net weight
  480 g
• Height
  185 mm
• Ambient temperature (operation)
  -25 °C ... 60 °C
• Note on the connection method
  D-coded
• Supply voltage
  24 V DC
• Air pressure (operation)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
• Input name
  Digital inputs
• Housing material
  Pocan®
• Equipment type
  EtherCAT® slave
• Width
  60 mm
• Drill hole spacing
  198.5 mm
• Designation
  Actuators (UA)
• Type of addressing
  Auto-increment addressing
• Description of the input
  EN 61131-2 types 1 and 3
• Number of inputs
  8
• Protective circuit
  Overload protection, short-circuit protection of outputs yes
• Note on dimensions
  The height is 212 mm including fixing clips.
• Air pressure (storage/transport)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
• Mounting type
  Wall mounting
Number
2
Number of positions
4
System-specific protocols
Mailbox protocols CANopen® over EtherCAT®
Nominal load, inductive
12 VA (1.2 H, 48 Ω, with nominal voltage)
Test section
24 V supply (communications power and sensor supply, digital inputs)/bus connection (Ethernet 1) 500 V AC 50 Hz 1 min.
Behavior with overload
Auto restart
REACh SVHC
Lead 7439-92-1
ECLASS 10.0.1
27242604
ETIM 2.0
EC001433
ETIM 4.0
EC001599
UNSPSC 7.0901
43201404
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Input voltage range "1" signal
11 V DC ... 30 V DC
Nominal output voltage
24 V DC (from voltage UA)
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
Degree of protection
IP65/IP67
Permissible humidity (storage/transport)
5 % ... 95 %
Permissible humidity (operation)
5 % ... 95 %
Transmission speed
100 Mbps (with auto negotiation)
Current consumption
typ. 30 mA ±15 % (at 24 V DC)
Connection technology
3-conductor
Interference emission
Noise emission test as per EN 61000-6-4 Class A
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
ECLASS 4.1
27240400
ETIM 3.0
EC001599
UNSPSC 6.01
43172015
UNSPSC 20.0
32151602
Color
anthracite
Connection method
M12 connector, double occupancy
Designation connection point
Copper cable
Specification
ETG.1000 V1.02
Supply voltage range
18 V DC ... 31.2 V DC (including all tolerances, including ripple)
Nominal input voltage UIN
24 V DC
Output name
Digital outputs
Output voltage
24 V DC
Ambient temperature (storage/transport)
-25 °C ... 85 °C
Switching frequency
max. 5500 per second (with at least 50 mA load current)
Output voltage when switched off
max. 1 V
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)
ECLASS 4.0
27240400
ECLASS 5.0
27242200
Input voltage range "0" signal
0 V ... 5 V DC
Reverse voltage resistance to short pulses
Reverse voltage proof
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 11.0
27242604
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
ECLASS 7.0
27242604
ECLASS 6.0
27242600
UNSPSC 11
39121311
UNSPSC 12.01
39121311
Nominal load, ohmic
12 W (48 Ω, with nominal voltage)
Nominal input current at UIN
typ. 3 mA
Output current when switched off
max. 20 µA
ECLASS 5.1
27242600
UNSPSC 18.0
32151602
ETIM 6.0
EC001599
ETIM 7.0
EC001599
UNSPSC 19.0
32151602
Input filter time
< 1000 µs
Number of outputs
8
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
ECLASS 9.0
27242604
UNSPSC 13.2
32151602
UNSPSC 21.0
32151602