2701518 Phoenix Contact Programmable Logic Controllers

Product Details

• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Immunity to surge
  Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)
• China RoHS
  Environmentally Friendly Use Period = 25;
• Ambient temperature (operation)
  -25 °C ... 60 °C
• Description of the input
  EN 61131-2 types 1 and 3
• Input filter time
  < 1000 µs
• Output name
  Digital outputs
• Switching frequency
  max. 5500 per second (with at least 50 mA load current)
• Immunity to conducted interference
  Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
• Test section
  24 V supply (communications power and sensor supply, digital inputs)/bus connection (Ethernet 1) 500 V AC 50 Hz 1 min.
• ECLASS 11.0
  27242604
• ECLASS 5.0
  27242200
• ECLASS 9.0
  27242604
• UNSPSC 7.0901
  43201404
• UNSPSC 13.2
  32151602
• Degree of protection
  IP65/IP67
• Net weight
  740 g
• Connection method
  M12 connector, (A-coded)
• System-specific protocols
  PROFINET protocols LLDP
• Current consumption
  typ. 30 mA ±15 % (at 24 V DC)
Output voltage when switched off
max. 1 V
Reverse voltage resistance to short pulses
Reverse voltage proof
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
ECLASS 4.0
27240400
ECLASS 7.0
27242604
ETIM 2.0
EC001433
UNSPSC 12.01
39121311
UNSPSC 19.0
32151602
Depth
38 mm
Permissible humidity (storage/transport)
5 % ... 95 %
Designation
Actuators (UA)
Number of positions
4
Number of supported application relationships (AR)
2
Number of inputs
8
Protective circuit
Overload protection, short-circuit protection of outputs yes
Nominal load, inductive
48 VA (1.2 H, 48 Ω, with nominal voltage)
Output voltage
24 V DC
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
REACh SVHC
Lead 7439-92-1
ECLASS 4.1
27240400
ETIM 4.0
EC001599
UNSPSC 6.01
43172015
UNSPSC 20.0
32151602
Drill hole spacing
198.5 mm
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Note on the connection method
D-coded
Equipment type
PROFINET-Device
Protocols supported
SNMP v1
Housing material
Zinc die-cast
Designation connection point
Copper cable
Supply voltage range
18 V DC ... 31.2 V DC (including all tolerances, including ripple)
Input name
Digital inputs
Number of outputs
4
Nominal load, ohmic
48 W (48 Ω, with nominal voltage)
Output current when switched off
max. 20 µA
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
ECLASS 5.1
27242600
ETIM 3.0
EC001599
UNSPSC 11
39121311
UNSPSC 18.0
32151602
Height
185 mm
Permissible humidity (operation)
5 % ... 95 %
Air pressure (operation)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Number
2
Nominal input current at UIN
typ. 3 mA
Nominal output voltage
24 V DC (from voltage UA)
Behavior with overload
Auto restart
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
Interference emission
Noise emission test as per EN 61000-6-4 Class A
ECLASS 10.0.1
27242604
ECLASS 6.0
27242600
ETIM 6.0
EC001599
ETIM 7.0
EC001599
UNSPSC 21.0
32151602
Transmission speed
100 Mbps (with auto negotiation)
Width
60 mm
Mounting type
Wall mounting or DIN rail mounting; both with mounting plate.
Conformance class
B
Supply voltage
24 V DC
Ambient temperature (storage/transport)
-25 °C ... 85 °C
Nominal input voltage UIN
24 V DC
Input voltage range "0" signal
0 V ... 5 V DC
Connection technology
3-conductor
Input voltage range "1" signal
11 V DC ... 30 V DC
Note on dimensions
The height is 194.5 mm including the mounting plate. With fixing clips pulled out, the height is 212 mm. The depth is 38 mm including the mounting plate (30.5 mm without the mounting plate).