2701513 Phoenix Contact Programmable Logic Controllers

Product Details

• ECLASS 4.1
  27240400
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Note on dimensions
  The height is 212 mm including fixing clips.
• Protective circuit
  Overload protection, short-circuit protection of sensor supply
• Air pressure (operation)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
• Mounting type
  Wall mounting
• Designation connection point
  Copper cable
• Supply voltage
  24 V DC
• Protocols supported
  SNMP v1
• Description of the input
  IO-Link ports in digital input (DI) mode
• Equipment type
  PROFINET-Device
• Immunity to ESD
  Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
• UNSPSC 19.0
  32151602
• Width
  60 mm
• System-specific protocols
  PROFINET protocols LLDP
• Supply voltage range
  18 V DC ... 31.2 V DC (including all tolerances, including ripple)
• Nominal input current at UIN
  typ. 3 mA
• Permissible humidity (operation)
  5 % ... 95 %
• Color
  anthracite
• Note on the connection method
  D-coded
Sensor current per channel
max. 200 mA (from L+/L-)
Nominal output voltage
24 V DC
Designation
Actuators (UA)
Transmission speed
100 Mbps (with auto negotiation)
Current consumption
typ. 28 mA ±15 % (at 24 V DC)
Number of inputs
max. 8 (EN 61131-2 type 1)
Input voltage range "0" signal
-0.3 V DC ... 5 V DC
Type of protection
Overload protection
Height
185 mm
Ambient temperature (operation)
-25 °C ... 60 °C
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Housing material
Pocan®
Number of outputs
max. 8
Maximum output current per device
1.2 A
Interference emission
Noise emission test as per EN 61000-6-4 Class A
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
ETIM 3.0
EC001599
Permissible humidity (storage/transport)
5 % ... 95 %
Degree of protection
IP65/IP67
Connection method
M12 connector, X01 ... X04 have double occupancy
Number of positions
4
Input name
Digital inputs at pin 2 for type A ports
Nominal input voltage UIN
24 V DC
UNSPSC 21.0
32151602
Depth
30.5 mm
Input voltage range "1" signal
15 V DC ... 30 V DC
Total sensor current
max. 1.6 A (from L+/L-)
Nominal load, ohmic
3.6 W (160 Ω, at nominal load)
Conformance class
B
Number of supported application relationships (AR)
2
Connection technology
3-conductor
ECLASS 10.0.1
27242604
ECLASS 4.0
27240400
ETIM 2.0
EC001433
Input filter time
< 1000 µs
Input frequency
0.5 kHz
Drill hole spacing
198.5 mm
Ambient temperature (storage/transport)
-25 °C ... 85 °C
Maximum output current per channel
150 mA
Net weight
556.8 g
Number
2
Output current when switched off
max. 300 µA
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
China RoHS
Environmentally Friendly Use Period = 25;
UNSPSC 6.01
43172015
ETIM 6.0
EC001599
Switching rate
1 per second, maximum (at nominal inductive load)
Test section
24 V supply (communications power and sensor supply, IO-Link ports)/bus connection (Ethernet 1) 500 V AC 50 Hz 1 min.
Output description
IO-Link ports in digital output (DO) mode
Nominal load, inductive
3.6 VA (0.8 H, 160 Ω, at nominal load)
Limitation of the voltage induced on circuit interruption
-15 V DC
Output voltage when switched off
max. 1 V
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
Nominal input current
typ. 3 mA
Signal delay
max. 150 µs (when switched on)
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
ECLASS 9.0
27242604
UNSPSC 11
39121311
UNSPSC 18.0
32151602
ECLASS 6.0
27242600
Behavior with overload
Shutdown with automatic restart
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
ETIM 7.0
EC001599
UNSPSC 13.2
32151602
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)
ECLASS 11.0
27242604
ECLASS 5.1
27242600
ETIM 4.0
EC001599
ECLASS 7.0
27242604
UNSPSC 7.0901
43201404
UNSPSC 20.0
32151602
ECLASS 5.0
27242200
UNSPSC 12.01
39121311