2701508 Phoenix Contact Programmable Logic Controllers

Product Details

• UNSPSC 7.0901
  43201404
• UNSPSC 13.2
  32151602
• Width
  60 mm
• Drill hole spacing
  198.5 mm
• Number of ports
  4
• Output description
  IO-Link ports in digital output (DO) mode
• Nominal load, inductive
  3.6 VA (0.8 H, 160 Ω, at nominal load)
• Behavior with overload
  Shutdown with automatic restart
• Immunity to surge
  Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)
• China RoHS
  Environmentally Friendly Use Period = 25;
• ECLASS 4.0
  27240400
• ECLASS 6.0
  27242600
• ETIM 2.0
  EC001433
• Permissible humidity (storage/transport)
  5 % ... 95 %
• Nominal output voltage
  24 V DC
• Nominal load, ohmic
  3.6 W (160 Ω, at nominal load)
• Output current when switched off
  max. 300 µA
• Immunity to ESD
  Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
• Ambient temperature (operation)
  -25 °C ... 60 °C
• Housing material
  Zinc die-cast
Number
2
Transmission physics
PROFIBUS-DP-compliant copper cable
Equipment type
PROFIBUS slave
Supply voltage
24 V DC
Input name
Digital inputs at pin 2 for type A ports
Nominal input current at UIN
typ. 3 mA
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Input frequency
0.5 kHz
Switching rate
1 per second, maximum (at nominal inductive load)
Depth
38 mm
Output voltage when switched off
max. 1 V
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
Permissible humidity (operation)
5 % ... 95 %
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Mounting type
Wall mounting or DIN rail mounting; both with mounting plate.
Connection method
M12 connector, X01 ... X04 have double occupancy
Connection technology
3-conductor
Number of inputs
max. 8 (EN 61131-2 type 1)
Sensor current per channel
max. 200 mA (from L+/L-)
Total sensor current
max. 1.6 A (from L+/L-)
Number of outputs
max. 8
REACh SVHC
Lead 7439-92-1
ECLASS 11.0
27242604
ECLASS 5.1
27242600
Signal delay
max. 150 µs (when switched on)
Test section
24 V supply (communications power and sensor supply, IO-Link ports)/bus connection 500 V AC 50 Hz 1 min.
Degree of protection
IP65/IP67
Net weight
710 g
Transmission speed
9.6 kbps ... 12 Mbps (Automatic baud rate detection)
Height
185 mm
Number of positions
4
Nominal input voltage UIN
24 V DC
Input filter time
< 1000 µs
Input voltage range "0" signal
-0.3 V DC ... 5 V DC
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
Port type
Class A
Maximum output current per channel
150 mA
ECLASS 4.1
27240400
ECLASS 7.0
27242604
Ambient temperature (storage/transport)
-25 °C ... 85 °C
Designation
IO-Link
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
ECLASS 10.0.1
27242604
Designation connection point
Copper cable
System-specific protocols
PROFIBUS protocols DP V1
Protective circuit
Overload protection, short-circuit protection of sensor supply
Cycle Time
min. 2 ms (MasterCycleTime: PDInput* + PDOutput* + OnReqData* < = 17 Bytes, COM3; * see "IO-Link Interface and System Specification V1.1.2")
Maximum output current per device
1.2 A
Limitation of the voltage induced on circuit interruption
-15 V DC
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
ECLASS 5.0
27242200
ETIM 3.0
EC001599
ETIM 7.0
EC001599
Note on dimensions
The height is 194.5 mm including the mounting plate. With fixing clips pulled out, the height is 212 mm. The depth is 38 mm including the mounting plate (30.5 mm without the mounting plate).
Air pressure (operation)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Interference emission
Noise emission test as per EN 61000-6-4 Class A
Current consumption
typ. 30 mA ±15 % (at 24 V DC)
Permissible cable length
< 20 m
Note on the connection method
B-coded
Nominal voltage for I/O supply
24 V DC
Description of the input
IO-Link ports in digital input (DI) mode
Address area assignment
1 ... 126, adjustable
Nominal current for every IO-Link port
max. 150 mA (at C/Q (pin 4), maximum of 1.6 A over all 8 IO-Link C/Q and L+ cables)
Type of protection
Overload protection
Input voltage range "1" signal
15 V DC ... 30 V DC
ECLASS 9.0
27242604
ETIM 6.0
EC001599
UNSPSC 18.0
32151602
ETIM 4.0
EC001599
UNSPSC 21.0
32151602
Nominal input current
typ. 3 mA
UNSPSC 12.01
39121311
Supply voltage range
18 V DC ... 31.2 V DC (including all tolerances, including ripple)
UNSPSC 19.0
32151602
UNSPSC 11
39121311
UNSPSC 6.01
43172015
UNSPSC 20.0
32151602