2701507 Phoenix Contact Programmable Logic Controllers

Product Details

• Number
  2
• Designation connection point
  Copper cable
• Equipment type
  PROFIBUS slave
• Number of inputs
  8
• Input voltage range "1" signal
  11 V DC ... 30 V DC
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Note on dimensions
  The height is 194.5 mm including the mounting plate. With fixing clips pulled out, the height is 212 mm. The depth is 38 mm including the mounting plate (30.5 mm without the mounting plate).
• Nominal load, ohmic
  48 W (48 Ω, with nominal voltage)
• Housing material
  Zinc die-cast
• Height
  185 mm
• Nominal input voltage UIN
  24 V DC
• Input filter time
  < 1000 µs
• Nominal output voltage
  24 V DC (from voltage UA)
• Output voltage when switched off
  max. 1 V
• Immunity to burst
  Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
• REACh SVHC
  Lead 7439-92-1
• ECLASS 5.0
  27242200
• ECLASS 7.0
  27242604
• Ambient temperature (storage/transport)
  -25 °C ... 85 °C
• Air pressure (storage/transport)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (operation)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Connection method
M12 connector, (A-coded)
Designation
Actuators (UA)
Address area assignment
1 ... 126, adjustable
System-specific protocols
PROFIBUS protocols DP V1
Input name
Digital inputs
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
ECLASS 4.1
27240400
ECLASS 10.0.1
27242604
Ambient temperature (operation)
-25 °C ... 60 °C
Permissible humidity (storage/transport)
5 % ... 95 %
Mounting type
Wall mounting or DIN rail mounting; both with mounting plate.
Note on the connection method
B-coded
Number of positions
4
Supply voltage
24 V DC
Nominal input current at UIN
typ. 3 mA
Output voltage
24 V DC
Number of outputs
4
Switching frequency
max. 5500 per second (with at least 50 mA load current)
Depth
38 mm
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
ECLASS 5.1
27242600
ETIM 4.0
EC001599
UNSPSC 12.01
39121311
UNSPSC 19.0
32151602
Current consumption
typ. 30 mA ±15 % (at 24 V DC)
Connection technology
3-conductor
Description of the input
EN 61131-2 types 1 and 3
Output name
Digital outputs
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 9.0
27242604
ETIM 6.0
EC001599
Width
60 mm
Drill hole spacing
198.5 mm
Permissible humidity (operation)
5 % ... 95 %
Degree of protection
IP65/IP67
Net weight
726.3 g
Transmission speed
9.6 kbps ... 12 Mbps (Automatic baud rate detection)
Transmission physics
PROFIBUS-DP-compliant copper cable
Supply voltage range
18 V DC ... 31.2 V DC (including all tolerances, including ripple)
Output current when switched off
max. 20 µA
Interference emission
Noise emission test as per EN 61000-6-4 Class A
ECLASS 11.0
27242604
ECLASS 4.0
27240400
ECLASS 6.0
27242600
ETIM 7.0
EC001599
Protective circuit
Overload protection, short-circuit protection of outputs yes
Nominal load, inductive
48 VA (1.2 H, 48 Ω, with nominal voltage)
Behavior with overload
Auto restart
Reverse voltage resistance to short pulses
Reverse voltage proof
Test section
24 V supply (communications power and sensor supply, digital inputs)/bus connection 500 V AC 50 Hz 1 min.
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
ETIM 2.0
EC001433
UNSPSC 13.2
32151602
UNSPSC 20.0
32151602
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)
UNSPSC 7.0901
43201404
UNSPSC 21.0
32151602
Input voltage range "0" signal
0 V ... 5 V DC
UNSPSC 6.01
43172015
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
ETIM 3.0
EC001599
UNSPSC 11
39121311
UNSPSC 18.0
32151602